US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Shielded Power Inductors
–
LPS5015
Document 585-1
Document 585-1 Revised 12/08/11
DCR SRF Isat (A)5 Irms (A)6
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise
LPS5015-102ML_ 1.0 0.050 183 3.6 3.8 3.9 1.90 2.65
LPS5015-132ML_ 1.3 0.065 150 2.5 2.6 2.8 1.70 2.35
LPS5015-182ML_ 1.8 0.075 128 2.6 2.8 2.9 1.50 2.15
LPS5015-222ML_ 2.2 0.090 116 2.4 2.6 2.7 1.40 2.00
LPS5015-332ML_ 3.3 0.125 88 1.9 2.0 2.0 1.30 1.80
LPS5015-472ML_ 4.7 0.150 73 1.6 1.7 1.8 1.20 1.62
LPS5015-562ML_ 5.6 0.175 67 1.6 1.6 1.6 1.10 1.45
LPS5015-682ML_ 6.8 0.225 57 1.3 1.4 1.5 0.90 1.25
LPS5015-822ML_ 8.2 0.280 49 1.3 1.3 1.4 0.85 1.05
LPS5015-103ML_ 10 0.300 44 1.2 1.3 1.3 0.80 0.95
LPS5015-123ML_ 12 0.350 40 1.0 1.1 1.2 0.75 0.84
LPS5015-153ML_ 15 0.360 38 0.80 0.84 0.86 0.73 0.84
LPS5015-183ML_ 18 0.550 35 0.75 0.77 0.80 0.70 0.83
LPS5015-223ML_ 22 0.675 31 0.70 0.73 0.75 0.60 0.82
LPS5015-333ML_ 33 0.750 24 0.55 0.59 0.60 0.50 0.70
LPS5015-473ML_ 47 1.00 18 0.46 0.48 0.49 0.45 0.57
LPS5015-563ML_ 56 1.13 17 0.40 0.43 0.45 0.40 0.52
LPS5015-683ML_ 68 1.45 15 0.33 0.38 0.39 0.35 0.47
LPS5015-104ML_ 100 1.95 12 0.30 0.33 0.34 0.30 0.42
LPS5015-124ML_ 120 2.50 10 0.25 0.28 0.30 0.27 0.37
LPS5015-154ML_ 150 3.40 9.3 0.23 0.25 0.26 0.25 0.33
LPS5015-224ML_ 220 4.50 7.3 0.20 0.21 0.22 0.22 0.29
LPS5015-334ML_ 330 7.40 5.7 0.15 0.17 0.18 0.17 0.22
LPS5015-474ML_ 470 7.50 4.9 0.12 0.12 0.13 0.16 0.21
LPS5015-564ML_ 560 8.50 4.3 0.10 0.11 0.12 0.14 0.190
LPS5015-684ML_ 680 10.6 4.0 0.10 0.11 0.11 0.13 0.175
LPS5015-105ML_ 1000 15.0 3.2 0.080 0.090 0.093 0.10 0.150
LPS5015-155ML_ 1500 25.0 2.5 0.080 0.086 0.088 0.090 0.140
LPS5015-185ML_ 1800 28.0 2.2 0.078 0.083 0.086 0.085 0.130
LPS5015-225ML_ 2200 36.0 2.1 0.072 0.078 0.080 0.065 0.090
LPS5015-335ML_ 3300 55.0 1.7 0.064 0.072 0.076 0.055 0.075
LPS5015-475ML_ 4700 80.0 1.4 0.062 0.069 0.072 0.045 0.065
• Very low DCR; excellent current handling
• 5.0 × 5.0 mm footprint; less than 1.5 mm tall
Designer’s Kit C350 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 102 – 107 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth
Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
1. Please specify termination and packaging codes:
LPS5015-335MLC
Termination: L = RoHS compliant silver-palladium-
platinum-glass frit.
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-
lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481
embossed plastic tape 1000 parts
per full reel).
B = Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D = 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked (3500 parts per full
reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an Agi-
lent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Shielded Power Inductors
–
LPS5015 Series
Document 585-2
Typical L vs CurrentTypical L vs Frequency
Typical Current Derating 0.189 ±0.003
4,80 ±0,076
0.0551 ±0.004
1,4 ±0,1
Winding
direction
Dash
number Internal
code
XXX X
0.189 ±0.003
4,80 ±0,076 *
*
Dimensions are of the case not
including the termination. Formaximum
overall dimensions including the
termination, add 0.005 in/0,13 mm.
*
0.060
1,50
0.039
1,00 typ
typ
0.039
1,00
**
Foroptional tin-lead and tin-silver-copper
terminations,dimensions are forthe
mounted part. Dimensions before mounting
can be an additional 0.005 inch (0,13 mm).
**
0.217
5,51
0.134
3,40
0.134
3,40
0.134
3,40
0.060
1,52
0.217
5,51
0.0665
1,689
Recommended
Land Pattern
0.134
3,40
1
10
10000
1000
100
0.01 0.1
11
0
Frequency (MHz)
Inductance (µH)
10 µH
3.3 µH
33 µH
1000 µH
3300 µH
330 µH
100 µH
1
10
10000
1000
100
0.01 0.1
11
0
Current (A)
Inductance (µH)
3.3 µH
33 µH
330 µH
1000 µH
3300 µH
100 µH
10 µH
-40 -20 020406080100 140120
Ambient temperature (°C)
Percent of rated current
120
110
100
90
80
70
60
50
40
30
20
10
0
Isat
Irms
25°C
Dimensions are in inches
mm
Document 585-2 Revised 12/08/11
