DATA SH EET
Product data sheet
Supersedes data of 1999 May 31
2004 Jan 16
DISCRETE SEMICONDUCTORS
BCX17; BCX18
PNP general purpose transistors
2004 Jan 16 2
NXP Semiconductors Product data sheet
PNP general purpose transistors BCX17; BCX18
FEATURES
•High current (max. 500 mA)
•Low voltage (max. 45 V).
APPLICATIONS
•Saturated switching and driver applications e.g . for
industrial service
•Thick and thin-film circuits.
DESCRIPTION
PNP transistor in a SOT23 plastic package.
NPN complement: BCX19.
MARKING
Note
1. * = p : Made in Hong Kong .
* = t : Made in Malaysia.
* = W : Made in China.
PINNING
TYPE NUMBER MARKING CODE(1)
BCX17 T1*
BCX18 T2*
PIN DESCRIPTION
1base
2emitter
3collector
Fig.1 Simplified outline (SOT23 ) and symbo l .
handbook, halfpage
21
3
MAM256
Top view
2
3
1
ORDERING INFORMATION
TYPE
NUMBER PACKAGE
NAME DESCRIPTION VERSION
BCX17 −plastic surface mounted p a ckage; 3 leads SOT23
BCX18
2004 Jan 16 3
NXP Semiconductors Pr oduct data shee t
PNP general purpose transistors BCX17; BCX18
LIMITING VALUES
In accordance with th e Absolute Ma ximum Ratin g System (IEC 60134).
Note
1. Transistor mounted on an FR4 printed-circuit boar d.
THERMAL CHARACTE RISTICS
Note
1. Transistor mounted on an FR4 printed-circuit boar d.
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
VCBO collector-base volta ge open emitter
BCX17 − −50 V
BCX18 − −30 V
VCEO collector-emitter voltage open base
BCX17 − −45 V
BCX18 − −25 V
VEBO emitter-base voltage open collector − −5 V
ICcollector current (DC) − −500 mA
ICM peak collector current − −1 A
IBM peak base current − −200 mA
Ptot total power dissipation Tamb ≤ 25 °C; note 1 −250 mW
Tstg storage temperature −65 +150 °C
Tjjunction temperature −150 °C
Tamb operating ambient temperature −65 +150 °C
SYMBOL PARAMETER CONDITIONS VALUE UNIT
Rth(j-a) thermal resistance from junction to ambient note 1 500 K/W
2004 Jan 16 4
NXP Semiconductors Pr oduct data shee t
PNP general purpose transistors BCX17; BCX18
CHARACTERISTICS
Tj = 25 °C unless otherwise specified.
Note
1. VBE decreases by approximately −2 mV/°C with increasing temperatu re.
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
ICBO collector cut-off current IE = 0; VCB = −20 V −−−100 nA
IE = 0; VCB = −20 V; Tj = 150 °C−−−5μA
IEBO emitter cut-off current IC = 0; VEB = −5 V −−−100 nA
hFE DC current gain IC = −100 mA; VCE = −1 V 100 −600
IC = −300 mA; VCE = −1 V 70 − −
IC = −500 mA; VCE = −1 V 40 − −
VCEsat collector-emitter saturation voltage IC = −500 mA; IB = −50 mA −−−620 mV
VBE base-emitter voltage IC = −500 mA; VCE = −1 V; note 1 −−−1.2 V
Cccollector cap a citance IE = Ie = 0; VCB = −10 V; f = 1 MHz −9−pF
fTtransition frequency IC = −10 mA; VCE = −5 V; f = 100 MHz 80 − − MHz
2004 Jan 16 5
NXP Semiconductors Pr oduct data shee t
PNP general purpose transistors BCX17; BCX18
PACKAGE OUTLINE
UNIT A
1
max. b
p
cDE e
1
H
E
L
p
Qwv
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
04-11-04
06-03-16
IEC JEDEC JEITA
mm 0.1 0.48
0.38 0.15
0.09 3.0
2.8 1.4
1.2 0.95
e
1.9 2.5
2.1 0.55
0.45 0.1
0.2
DIMENSIONS (mm are the original dimensions)
0.45
0.15
SOT23 TO-236AB
bp
D
e1
e
A
A1
Lp
Q
detail X
HE
E
w
M
v
M
A
B
AB
0 1 2 mm
scale
A
1.1
0.9
c
X
12
3
Plastic surface-mounted package; 3 leads SOT2
3
2004 Jan 16 6
NXP Semiconductors Pr oduct data shee t
PNP general purpose transistors BCX17; BCX18
DATA SHEET STATUS
Notes
1. Please consult the most recently issued document before initiating or completing a design.
2. The product s ta tus of device(s ) described in this document may have changed since this do cument was publishe d
and may differ in case of multiple devices. The latest product status information is available on the Internet at
URL http://www.nxp.com.
DOCUMENT
STATUS(1) PRODUCT
STATUS(2) DEFINITION
Objective data sheet Development This document contains data from the objective specificat ion for product
development.
Preliminary data sheet Qualification This document contains data from the preliminary specification.
Product data sheet Production This document contains the product spe cific ation.
DISCLAIMERS
General ⎯ Information in this document is believed to be
accurate and reliable . H ow ev er, NXP Semiconductors
does not give any representations or warranties,
expressed or implied, as to the accuracy or completeness
of such information and shall have no liability for the
consequenc es of use of such information.
Right to make changes ⎯ NXP Semiconductors
reserves the right to make changes to information
published in this doc ument, including without limitation
specifications and product descriptions, at any time and
without notice. This document supersedes and replaces all
information supplied prior to the publication hereof.
Suitability for use ⎯ NXP Semiconductors products are
not designed, au thorized or warranted to be suitable for
use in medical, military, aircraft, space or life support
equipment, nor in applications where failure or malfunction
of an NXP Semiconductors product can reas onably be
expected to result in pe rs onal injury, death or severe
property or environmental damage. NXP Semiconductors
accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or
applications and therefor e s uc h inclusion and/or use is at
the customer’s own risk .
Applications ⎯ Applications that are described herein for
any of these products are for illustrative purposes only.
NXP Semiconductors makes no representation or
warranty that such applications will be suitable for the
specified use witho ut fu rth e r testing or modification .
Limiting values ⎯ Stress above one or more limiting
values (as defined in the Absolute Maximum Ratings
System of IEC 60134) may cause permanent damage to
the device. Limiting values are stress ratings only and
operation of the device at these or any other co nditions
above those given in the Characteristics sections of this
document is not implied. Exposure to limiting values for
extended periods may affect device reliability.
Terms and conditions of sale ⎯ NXP Semiconductors
products are sold subject to the general terms and
conditions of commercial sale, as published at
http://www.nxp.com/profile/terms, including those
pertaining to warranty, intellectual property rights
infringement and limitation of liability, unless explicitly
otherwise agreed to in writing by NXP Semiconductors. In
case of any incons istency or conflict betw een information
in this document an d such terms and conditio ns, the latter
will prevail.
No offer to sell or license ⎯ Nothing in this document
may be interpreted or construed as an offer to sell products
that is open for accept ance or the grant, c onveyance or
implication of any license under any copyrights, patents or
other industr i al or inte llectual property rights.
Export control ⎯ This document as well as the item(s)
described herein may be subject to export control
regulations. Export might require a prior authorization from
national author ities.
Quick refer ence data ⎯ The Quick reference data is an
extract of th e product data given in the Limiting values an d
Characteristics sections of this docu ment, and as such is
not complete, exhaus tive or legally binding.
NXP Semiconductors
Contact information
For additional information p lease visit: http://www.nxp.com
For sales offices addresses send e-mail to: salesaddresses@nxp.com
© NXP B.V. 2009
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information pr e sent ed in this document d oes not form part o f an y q uotation or contra ct, is b elieve d t o b e a ccur ate a nd re li a ble and may be chan ged
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Customer notification
This data sheet was changed to reflect the new company name NXP Semiconductors, including new legal
definitions and disclaimer s. No changes were made to the technical content, exc ept for package outline
drawings which were updated to the latest version.
Printed in The Netherlands R75/04/pp7 Date of release: 2004 Jan 16 Document orde r number: 9397 750 12406
