MCCSEMI.COM
Rev.3-2-12262019
1/3
MURS1JBL
Features
Maximum Ratings
1 Amp Super Fast
Recovery Rectifier
600 Volts
Electrical Characteristics @ 25°C Unless Otherwise Specied
Note: 1. High Temperature Solder Exemptions Applied, See EU Directive Annex 7a.
•Operating Junction Temperature Range: -55⁰C to +150⁰C
•Storage Temperature Range: -55⁰C to +150⁰C
•Maximum Thermal Resistance: 13°C/W Junction to Lead
•Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix Designates
Compliant. See Ordering Information)
•Halogen Free Available Upon Request By Adding Suffix "-HF"
•Epoxy Meets UL 94 V-0 Flammability Rating
•Moisture Sensitivity Level 1
MURS1JBL UR1JL 600V 420V600V
MCC
Part Number
Device
Marking
Maximum
Recurrent
Peak Reverse
Voltage
Maximum
RMS Voltage
Maximum DC
Blocking
Voltage
Maximum Reverse
Recovery Time TRR 50ns IF=0.5A; IR=1.0A;
Irr=0.25A
Max Peak Reverse
Current IRM
5.0μA
150μA
TJ=25⁰C;
TJ=150⁰C
Maximum Surge
Current IFSM 35A8.3ms,Half Sine
VFM1.25VIF=1.0A
Average Forward
Current IF(AV) 1.0A See Fig 1
Max Peak Forward
Voltage
Typical Junction
Capacitance CJ15pF VR=4.0A, f=1MHz
SMB (DO-214AA)
H
J
E
F
G
A
B
D
C
MIN MAX MIN MAX
A0.079 0.103 2.00 2.62
B 0.075 0.0871.91 2.21
C 0.002 0.008 0.05 0.20
D0.006 0.0120.15 0.31
E 0.030 0.0600.76 1.52
F 0.065 0.091 1.65 2.32
G 0.200 0.220 5.08 5.59
H 0.160 0.191 4.06 4.85
J 0.130 0.155 3.30 3.94
DIMENSIONS
DIM INCHES MM NOTE
Cathode Mark
Suggested Solder Pad Layout
2.50mm
1.80mm
2.30mm
MCCSEMI.COM
Rev.3-2-12262019
2/3
Curve Characteristics
MURS1JBL
0 25 125 150
0.0
0.2
0.4
0.6
0.8
1.0
1.2
Average Forward Current (A)
50 75 100
Temperature (°C)
Resistive or Inductive Load
Fig. 1 - Forward Current Derating Curve
1 100
0
5
10
15
20
25
30
35
40
Peak Forward Surge Current (A)
8.3 ms Single8.3 ms Single
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge
Current
10
Number of Cycles at 60 Hz
0.01
0.1
1
10
0.4 0.6 1.6 1.8
Instantaneous Forward Current (A)
TJ=25°C
Fig. 3 - Typical Instantaneous Forward Characteristics
0.8 1.0 1.2 1.4
Instantaneous Forward Voltage (V)
20 100
0.01
0.1
1
10
TJ=125°C
TJ=75°C
Instantaneous Reverse Leakage Current (μA)
Fig. 4 - Typical Reverse Leakage Characteristics
TJ=25°C
40 60 80
Percent of Rated Peak Reverse Voltage (%)
Half Sine-Wave
TA
TL
MCCSEMI.COM
Rev.3-2-12262019
3/3
Ordering Information
MURS1JBL
Device Packing
Part Number-TP Tape&Reel: 3Kpcs/Reel
Note : Adding "-HF" Suffix For Halogen Free, eg. MURS1JBL-TP-HF
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express
written approval of Micro Commercial Components Corporation.
***CUSTOMER AW ARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
