SPEC NO: DSAG0882 REV NO: V.4 D ATE: MAY/04/2007 P AGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DR AWN: D.M.LIU ERP: 1204000614
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: APKA2810PBC/A-F0 1 BLU E
Description
The Blue source color devices are made with InGaN on SiC
Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
PRELIMINARY SPEC
2.8X1.0mm RIGHT ANGLE SMD CHIP LED
LAMP
Features
●2.8mmX1.0mm RIGHT ANGLE SMT LED, 1.2mm
THICKNESS.
●LOW POWER CONSUMPTION.
●IDEAL FOR BACKLIGHT AND INDICATOR.
●VARIOUS COLORS AND LENS TYPES AVAILABLE.
●PACKAGE : 2000PCS / REEL.
●MOISTURE SENSITIVITY LEVEL : LEVEL 4.
●RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(±0.01") unless otherwise noted.
3.Specifications are subject to change without notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAG0882 REV NO: V.4 D ATE: MAY/04/2007 P AGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DR AWN: D.M.LIU ERP: 1204000614
Selection Guide
Part No. Dice Lens Type Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APKA2810PBC/A-F01 BLUE (InGaN) WATER CLEAR 36 70 90°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous Intensity / Luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Symbol Parameter Device Typ. Max. Test Conditions Units
λpeak Peak Wavelength Blue 468 nm IF=20mA
λD [1] Dominant Wavelength Blue 470 nm IF=20mA
Δλ1/2 Spectral Line Half-width Blue 21 nm IF=20mA
C Capacitance Blue 100 pF VF=0V;f=1MHz
VF [2] Forward Voltage Blue 3.2 4.0 V IF=20mA
IR Reverse Current Blue 10 uA VR = 5V
Parameter Blue Units
Power dissipation 120 mW
DC Forward Current 30 mA
Peak Forward Current [1] 100 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
SPEC NO: DSAG0882 REV NO: V.4 D ATE: MAY/04/2007 P AGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DR AWN: D.M.LIU ERP: 1204000614
Blue APKA2810PBC/A-F01
SPEC NO: DSAG0882 REV NO: V.4 D ATE: MAY/04/2007 P AGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DR AWN: D.M.LIU ERP: 1204000614
Tape Specifications
(Units : mm)
APKA2810PBC/A-F01
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
SPEC NO: DSAG0882 REV NO: V.4 D ATE: MAY/04/2007 P AGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DR AWN: D.M.LIU ERP: 1204000614
PACKING & LABEL SPECIFICATIONS APKA2810PBC/A-F01
