PLN-300 Series - OEM Pressure Transmitters Rev. 7.02 electromagnetic interference. This feature is available as an option for the 4-20 mA, 2 wire output signal. Applications pressure products With a stainless steel case and compact design, STI OEM pressure transmitters provide a high performance sensor package featuring excellent vibration resistance and long service life. OEM applications include hydraulics, pneumatics, HVAC compressor control, machine tools, robotics and off road equipment. PLN-300 Series OEM Pressure Transmitters Solid state OEM pressure transmitter Wide range of pressure options -- absolute and gage High vibration resistance -- 4-20 mA standard Low cost for OEM requirements Operational Description STI OEM pressure transmitters are specifically designed to meet price and performance requirements of Original Equipment Manufacturers. Model PLN-300 pressure transmitters use a piezoresistive sensing element for absolute and gage referenced pressure ranges 100 INWC to 300 psi. Model PLN-310 pressure transmitters use a thin film sensor for pressure ranges 400 to 15,000 psi. Both models feature a highly stable, temperature compensated, conditioned output signal. For additional reliability, 3 wire voltage and current output circuits are protected from Scientific Technologies Inc. Automation Products Group ... Providing tailored solutions for measurement applications. R 116 Options Table Process Connection P1*: 1/4 NPTM P2: NPT male or female (specify size) P3: SAE male or female (specify size) P4: JIC male or female (specify size) P5: BSP male or female (specify size) Electrical Connection E1*: Mini DIN plug (IP65/NEMA 5) E2: Mini DIN plug with integral 6 ft. cable (IP65/NEMA 5) E3: 1.5 m vented cable with free ends (IP67/NEMA 4) E4: Bendix PT02E 8-4P connector Output & Load Limitations L1*: 4-20 mA, 2-wire, R(max) = (VS -12 V)/0.02 L3: 0-5 V, 3-wire, R(min) 5 K L4: 0-10 V, 3-wire, R(min) 5 K L5: 1-5 VDC, 3-wire (Custom output signals are available, i.e. 1-5 V. Please inquire for specific details.) * Standard Tel: 1/888/525-7300 * Fax: 1/435/753-7490 www.stiautomationproducts.com * E-mail: sales@stiautomationproducts.com PLN-300 Series - OEM Pressure Transmitters X1: Extended temperature range X2: Absolute temperature range X3: Cleaned for oxygen service X4: Degreased X5: CE marked Series 300 Standard Ranges Range Range Maximum** Burst*** Option* (psig) (psi) (psi) 01 0-100 INWC 30 30 02 0-5 30 30 03 0-10 60 60 06 0-30 145 145 08 0-60 245 245 10 0-150 500 500 11 0-200 500 500 Note: Absolute ranges available. Series 310 Standard Ranges Specifications Input: 12-30 VDC* (Other supply voltage requirements may be met, i.e. 9-15 VDC. Please inquire for specific details.) Accuracy Linearity (B.F.S.L.): 0.5% of span Hysteresis: 0.1% of span Repeatability: 0.05% of span 1 Year Stability: 0.2% of span Response Time: 1 ms Dynamic Range: 150 Hz Temperature Standard Option 1 Effective Temperature Compensation: 32 to 176F (0 to 80C) -4 to 176F (-20 to 80C) Media: -22 to 212F (-30 to 100C) -40 to 257F (-40 to 120C) Ambient: 14 to 176F (-10 to 80C) -40 to 248F (-40 to 115C) Storage: -40 to 212F (-40 to 100C) -40 to 248F(-40 to 115C) Temperature Error: (Reference temperature 70F (21C)) On Zero (% span per 18F (10C)) 0.3 0.3 On Span (% span per 18F (10C)) 0.2 0.2 Material Series 300 Wetted Parts: 316SS Series 310 Wetted Parts: 17-4PH stainless steel and 316SS Body Material: 304SS Transmitting Liquid: Silicone oil (Series 300 only) Electrical Protection: Protected against reverse polarity, short circuit output and suppressor diode for high voltage protection. Weight: Approx. 0.25 lbs. (113 g) Approvals: CE on all models * Standard Wiring 2-Wire Current Loop Signal DIN Plug Wire Color Supply + Pin 1 Brown Signal Pin 2 Green 3-Wire Voltage Output Signal DIN Plug Wire Color Supply + Pin 1 Brown Supply-/SignalPin 2 Green Signal + Pin 3 White Note: Use pin 4 or blue wire for shield. Calibration All STI transmitters are calibrated at the factory. In the event calibration is required as a maintenance procedure, please use the following steps: 1. Remove cap 4. Set span pot 2. Set zero pot 5. Test span 3. Test zero 6. Replace cap 1 3 2 For the Latest Information Try Our Fax Back System at 1/916/431-6544 On the Internet: www.stiautomationproducts.com E-mail: sales@stiautomationproducts.com Scientific Technologies Inc. Automation Products Group ... Providing tailored solutions for measurement applications. R 117 Tel: 1/888/525-7300 * Fax: 1/435/753-7490 www.stiautomationproducts.com * E-mail: sales@stiautomationproducts.com pressure products Range Range Maximum** Burst*** Option (psig) (psi) (psi) 100 0-300 725 3625 101 0-400 725 3625 102 0-500 1160 5800 103 0-600 1160 5800 104 0-1000 1740 7975 105 0-1500 2900 11,600 106 0-2000 2900 11,600 107 0-3000 7250 17,400 108 0-5000 11,600 24,650 109 0-7500 17,400 34,800 110 0-10,000 17,400 34,800 111 0-15,000 21,750 43,500 Note: * All models are built to order. ** Maximum pressure, causing no permanent changes in specifications but may lead to zero and span shifts. *** Burst pressure, leading to permanent nonadjustable changes in specifications (i.e. zero offsets) or destruction of the transmitter. (A) Ranges available with absolute pressure reference. SPAN Options Table (continued) ZERO PLN-300 Series - OEM Pressure Transmitters Dimensions in. Ordering Information mm PLN-3 2.72 69 1.81 46 1.42 36 Strain Relief 2.00 51 - - - - Configuration 00 Piezoresistive Element (ranges < 99) 10 Thin Film Sensor Element (ranges > 100) Range Option 01-111 See Standard Ranges Tables on previous page Output and Load Limitation L1-L5 See Specifications on previous page. Process Connection P1-P5 See Options Table on previous page Electrical Connection E1-E4 See Options Table on previous page Options X1-X5 See Options Table on previous page 1.06 27 pressure products 2.76 70 1.06 27 - Scientific Technologies Inc. Automation Products Group ... Providing tailored solutions for measurement applications. R 118 Tel: 1/888/525-7300 * Fax: 1/435/753-7490 www.stiautomationproducts.com * E-mail: sales@stiautomationproducts.com PLN-300 Series - OEM Pressure Transmitters Wiring Schematics For the PLN-300, PLN-400, PLN-500 and PLN-700 Series 4-20 mA 2 Wire System 0-5 V, 1-5 V or 0-10 V 3 Wire System The 2 wire system connects the power supply, transmitter, and indicating/recording instruments in a series circuit. This creates a "current loop" with the transmitter functioning as a current regulating device. The 3 wire system features separate leads for the signal and power supply. The third lead is common minus for both devices. The signal source and indicating/ recording instrument are connected in series, the power supply in parallel. DIN Connector (PLN-300, 400 and 700 Series only) DIN Connector (PLN-300, 400 and 700 Series only) + VB(DC) - VB+/S+ Power Supply + VB(DC) - VB+ pressure products Power Supply S+ 1 - 1 3 + + 2 Display or Controller - 2 Display or Controller 0V/S- Shield Flying Leads Power Supply + VB(DC) - - 3 + Display or Controller 0V/S- Shield Flying Leads Brown VB+/S+ + Power Supply - Green OV/S- + - Brown VB+ White S+ Green OV/S- Blue Shield/Ground Controller Blue Shield Terminal Coding Notes: VB+ : Plus power supply OV : Minus power supply (common, ground) S+ : Plus output signal S: Minus output signal (common, ground) Shield : Cable shield/transmitter body The supply voltage must be higher than the minimum required voltage as determined by the load equation for the specific transmitter. Refer to the specifications section of the data sheets for additional information. For the Latest Information Try Our Fax Back System at 1/916/431-6544 On the Internet: www.stiautomationproducts.com E-mail: sales@stiautomationproducts.com Scientific Technologies Inc. Automation Products Group ... Providing tailored solutions for measurement applications. R 119 Tel: 1/888/525-7300 * Fax: 1/435/753-7490 www.stiautomationproducts.com * E-mail: sales@stiautomationproducts.com