Automotive Transient Voltage Suppression Diodes Axial Leaded - 5000W > 5KP Automotive Series RoHS 5KP Automotive Series Description The 5KP Automotive Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features * Low incremental surge resistance * Typical IR less than 2A above 12V VBR = 0.1% x VBR@25C x T * High temperature soldering guaranteed: * Glass passivated chip 260C/40 seconds / 0.375", junction in P600 package (9.5mm) lead length, 5 * 5000W peak pulse lbs., (2.3kg) tension capability at 10x1000s * Plastic package has waveform, repetition rate Underwriters Laboratory (duty cycles):0.01% Flammability classification * Fast response time: 94V-O typically less than 1.0ps * Matte Tin Lead-free plated from 0 Volts to BV min * Excellent clamping capability Agency Approvals AGENCY AGENCY FILE NUMBER E128662/E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit PPPM 5000 W PD 8.0 W IFSM 400 A VF 3.5 V TJ , TSTG -55 to 175 C Typical Thermal Resistance Junction to Lead RuJL 8.0 C/W Typical Thermal Resistance Junction to Ambient RuJA 40 C/W Peak Pulse Power Dissipation by 10x1000s test waveform (Fig.1) (Note 1) Steady State Power Dissipation on inifinite heat sink at TL=75C (Fig. 5) Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional only (Note 2) Maximum Instantaneous Forward Voltage at 100A for Unidirectional only. Operating Junction and Storage Temperature Range Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2. 2.Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. (c)2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/5KPAUTO.html for current information. 5KP Automotive Series Revised: August 30, 2009 9:24 AM 5KP Automotive Series * Halogen-Free * RoHS compliant * Typical maximum temperature coefficient Automotive Transient Voltage Suppression Diodes Axial Leaded - 5000W > 5KP Automotive Series Electrical Characteristics Part Number (Uni) Part Number (Bi) Reverse Stand off Voltage VR (Volts) Breakdown Voltage VBR (Volts) @ IT MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @ IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage I R @ VR ( A) Agency Approval 5KP12AAUTO 5KP12CAAUTO 12.0 13.30 14.70 5 19.9 256.3 2 X 5KP13AAUTO 5KP13CAAUTO 13.0 14.40 15.90 5 21.5 237.2 2 X 5KP14AAUTO 5KP14CAAUTO 14.0 15.60 17.20 5 23.2 219.8 2 X 5KP15AAUTO 5KP15CAAUTO 15.0 16.70 18.50 5 24.4 209.0 2 X 5KP16AAUTO 5KP16CAAUTO 16.0 17.80 19.70 5 26.0 196.2 2 X 5KP17AAUTO 5KP17CAAUTO 17.0 18.90 20.90 5 27.6 184.8 2 X 5KP18AAUTO 5KP18CAAUTO 18.0 20.00 22.10 5 29.2 174.7 2 X 5KP20AAUTO 5KP20CAAUTO 20.0 22.20 24.50 5 32.4 157.4 2 X 5KP22AAUTO 5KP22CAAUTO 22.0 24.00 26.90 5 35.5 143.7 2 X 5KP24AAUTO 5KP24CAAUTO 24.0 26.70 29.50 5 38.9 131.1 2 X 5KP26AAUTO 5KP26CAAUTO 26.0 28.90 31.90 5 42.1 121.1 2 X 5KP28AAUTO 5KP28CAAUTO 28.0 31.10 34.40 5 45.4 112.3 2 X 5KP30AAUTO 5KP30CAAUTO 30.0 33.30 36.80 5 48.4 105.4 2 X 5KP33AAUTO 5KP33CAAUTO 33.0 36.70 40.60 5 53.3 95.7 2 X 5KP36AAUTO 5KP36CAAUTO 36.0 40.00 44.20 5 58.1 87.8 2 X 5KP40AAUTO 5KP40CAAUTO 40.0 44.40 49.10 5 64.5 79.1 2 X For parts without A , the VBR is 10% and VC is 5% higher than with A parts 5KP Automotive Series Revised: August 30, 2009 9:24 AM (c)2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/5KPAUTO.html for current information. Automotive Transient Voltage Suppression Diodes Axial Leaded - 5000W > 5KP Automotive Series Ratings and Characteristic Curves (T =25C unless otherwise noted) A Figure 1 - Peak Pulse Power Rating Curve 100 Non-repetitive pulse waveform shown in Fig.3 TA=25C Peak Pulse Power (kW) 10 1 0.1 0.1s 75 50 25 0 1.0s 10s 100s 1.0ms 10ms 0 td - Pulse Width (sec.) 125 150 175 200 Peak Value IPPM 100 Bi-directional V=0V TJ=25C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 10000 Half Value IPPM IPPM ( ) 2 50 10/1000sec. Waveform as defined by R.E.A 1.0 2.0 3.0 1000 100 10 td 0 Uni-directional V=0V Uni-directional @ VR Cj (pF) IPPM- Peak Pulse Current, % IRSM 100 100000 tr=10sec Bi-directional @ VR Tj=25C f=1.0MHz Vsig=50mVp-p 1 1.0 4.0 10.0 100.0 1000.0 VBR - Reverse Breakdown Voltage (V) t-Time (ms) Figure 6 - Maximum Non-Repetitive Peak Forward Surge Current Figure 5 - Steady State Power Derating Curve 9 450 8 IFSM, Peak Forward Surge Current (A) Steady State Power Dissipation (W) 75 Figure 4 - Typical Junction Capacitance 150 7 6 5 4 3 L = 0.375" (9.5mm) Lead Lengths 2 1 0 50 TA - Ambient Temperature (C) Figure 3 - Pulse Waveform 0 25 5KP Automotive Series PPPM - Peak Pulse Power (kW) 100 Figure 2 - Pulse Derating Curve 0 25 50 75 100 125 150 175 200 TL - Lead Temperature(C) (c)2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/5KPAUTO.html for current information. 400 350 300 250 200 150 100 50 0 1 10 100 Number of Cycles at 60 Hz 5KP Automotive Series Revised: August 30, 2009 9:24 AM Automotive Transient Voltage Suppression Diodes Axial Leaded - 5000W > 5KP Automotive Series Soldering Parameters Lead-free assembly Reflow Condition TL - Temperature Max (Ts(max)) 200C - Time (min to max) (ts) 60 - 180 secs Average ramp up rate (Liquidus Temp (TL) to peak 3C/second max TS(max) to TL - Ramp-up Rate 3C/second max Reflow Temperature (T) Pre Heat Ramp-up 150C - Temperature Min (Ts(min)) tp TP tL Ts(max) Ramp-down Ts(min) ts Preheat 25C - Temperature (TL) (Liquidus) 217C - Time (min to max) (ts) 60 - 150 seconds t 25C to Peak Time (t) Peak Temperature (TP) 260+0/-5 C Time within 5C of actual peak Temperature (tp) 20 - 40 seconds Flow/Wave Soldering (Solder Dipping) Ramp-down Rate 6C/second max Peak Temperature : 265OC Time 25C to peak Temperature (TP) 8 minutes Max. Dipping Time : 10 seconds Do not exceed 280C Soldering : 1 time Physical Specifications Critical Zone TL to TP Environmental Specifications Weight 0.07oz., 2.1g Temperature Cycle JESD22-A104 Case P600 molded plastic body over passivated junction. Pressure Cooker JESD 22-A102 Polarity Color band denotes the cathode except Bipolar. High Temp. Storage JESD22-A103 Terminal Matte Tin axial leads, solderable per JESD22-B102D. HTRB JESD22-A108 Thermal Shock JESD22-A106 Dimensions D Dimensions C A B A Inches Millimeters Min Max Min Max A 1.000 - 25.40 - B 0.340 0.360 8.60 9.10 C 0.048 0.052 1.22 1.32 D 0.340 0.360 8.60 9.10 P600 5KP Automotive Series Revised: August 30, 2009 9:24 AM (c)2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/5KPAUTO.html for current information. Automotive Transient Voltage Suppression Diodes Axial Leaded - 5000W > 5KP Automotive Series Part Numbering System Part Marking System 5KPxxx XX AUTO -X Cathode Band 5KPXXX AUTO OPTION CODE: BLANK Reel Tape -B Bulk Packaging TYPE CODE: A Uni-Directional (5% Voltage Tolerance) CA Bi-Directional F VOLTAGE CODE (Refer to the Electrical Characteristics table) Littelfuse Logo Product Type SERIES CODE Part Number Component Package Quantity Packaging Option Packaging Specification 5KPxxxXXAUTO P600 800 Tape & Reel EIA STD RS-296E 5KPxxxXXAUTO-B P600 500 BULK Littelfuse Concord Packing Spec. DM-0016 (c)2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/5KPAUTO.html for current information. 5KP Automotive Series Revised: August 30, 2009 9:24 AM 5KP Automotive Series Packaging (c)2009 Littelfuse, Inc. Revised: August 30, 2009 9:24 AM