SOLOMON SYSTECH SEMICONDUCTOR TECHNICAL DATA SSD1702 Advance Information 240 Outputs Common / Segment Driver This document contains information on a new product. Specifications and information herein are subject to change without notice. http://www.solomon-systech.com SSD1702 Rev 1.1 P 1/46 Dec 2003 Copyright 2003 Solomon Systech Limited TABLE OF CONTENTS 1. GENERAL DESCRIPTION ................................................................................................................ 5 2. FEATURES ........................................................................................................................................ 5 3. ORDERING INFORMATION ............................................................................................................. 5 4. BLOCK DIAGRAM ............................................................................................................................ 7 5. DIE PAD COORDINATES ................................................................................................................. 8 6. TAB PACKAGE PIN ASSIGNMENT............................................................................................... 13 7. PIN DESCRIPTION.......................................................................................................................... 19 8. FUNCTIONAL BLOCK DESCRIPTIONS ........................................................................................ 22 9. FUNCTIONAL OPERATIONS ......................................................................................................... 24 10. DISPLAY DATA AND DRIVER OUTPUT PINS MAPPING ............................................................ 26 11. PRECAUTION.................................................................................................................................. 27 12. MAXIMUM RATINGS....................................................................................................................... 28 13. DC CHARACTERISTICS................................................................................................................. 29 14. AC CHARACTERISTICS................................................................................................................. 31 15. APPLICATION EXAMPLES OF COMMON DRIVERS ................................................................... 35 16. APPLICATION EXAMPLES OF SEGMENT DRIVERS .................................................................. 37 17. TIMING CHART OF CASCADE CONNECTION OF SEGMENT DRIVERS................................... 38 18. APPLICATION EXAMPLES ............................................................................................................ 39 19. TAB PACKAGE DETAIL DIMENSIONS ......................................................................................... 40 Solomon Systech Dec 2003 P 2/46 Rev 1.1 SSD1702 TABLE OF TABLES Table 1 - Ordering Information .................................................................................................................. 5 Table 2 - SSD1702Z die pad coordinates................................................................................................ 10 Table 3 - SSD1702T1 pin assignment ..................................................................................................... 14 Table 4 - SSD1702T2 pin assignment ..................................................................................................... 16 Table 5 - SSD1702T3 pin assignment ..................................................................................................... 18 Table 6 - Output level truth table for segment mode............................................................................. 24 Table 7 - Output level truth table for common mode ............................................................................ 25 Table 8 - 4-bit parallel, Segment Mode.................................................................................................... 26 Table 9 - 8-bit parallel, Segment Mode.................................................................................................... 26 Table 10 - Common Mode......................................................................................................................... 26 Table 11 - Maximum Ratings (Voltage Referenced to VSS).................................................................. 28 Table 12 - DC Characteristics (Unless otherwise specified, voltage referenced to VSS, VDD = 2.4 to 3.6V, V0=+15.0 to +30.0V, TA = -30 to 85C) ........................................................................... 29 Table 13 - DC Characteristics (Unless otherwise specified, voltage referenced to VSS, VDD = 2.4 to 3.6V, V0=+15.0 to +30.0V, TA = -30 to 85C) ........................................................................... 30 Table 14 - Interface Timing Characteristics (Unless otherwise specified, voltage referenced to VSS, VDD = +3.0 to +3.6V, V0=+15.0 to +30.0V, TA = -30 to 85C) ................................................ 31 Table 15 - Interface Timing Characteristics (VDD - VSS = +2.4 to +3.0V, V0=+15.0 to +30.0V, TA = 35 to 85C)................................................................................................................................ 32 Table 16 - Interface Timing Characteristics (VDD - VSS = +2.4 to +3.6V, V0=+15.0 to +30.0V, TA = -35 to 85C)..................................................................................................................................... 34 SSD1702 Rev 1.1 P 3/46 Dec 2003 Solomon Systech TABLE OF FIGURES Figure 1 - Block Diagram of SSD1702....................................................................................................... 7 Figure 2 - SSD1702Z die pad assignment................................................................................................. 8 Figure 3 - Alignment mark detail dimensions .......................................................................................... 9 Figure 4 - SSD1702T1 pin assignment (Copper view)........................................................................... 13 Figure 5 - SSD1702T2 pin assignment (Copper view)........................................................................... 15 Figure 6 - SSD1702T3 pin assignment (Copper view)........................................................................... 17 Figure 7 - Illustration of output voltages in segment mode ................................................................. 24 Figure 8 - Illustration of output voltages in common mode ................................................................. 25 Figure 9 - Recommended power up and down sequence .................................................................... 27 Figure 10 - Timing characteristics of SSD1702 in Segment mode ...................................................... 33 Figure 11 - Timing characteristics of SSD1702 in Common mode ...................................................... 34 Figure 12 - Application example of Single mode (L/R = L) ................................................................... 35 Figure 13 - Application example of Single mode (L/R = H) ................................................................... 35 Figure 14 - Application example of Dual mode (L/R = L) ...................................................................... 36 Figure 15 - Application example of Dual mode (L/R = H) ...................................................................... 36 Figure 16 - Application example of Segment mode (L/R = L) ............................................................... 37 Figure 17 - Application example of Segment mode (L/R = H) .............................................................. 37 Figure 18 - Timing chart of cascade connection of segment drivers .................................................. 38 Figure 19 - Typical configuration for 320x240 application ................................................................... 39 Figure 20 - SSD1702T1 TAB detail dimensions ..................................................................................... 40 Figure 21 - SSD1702T2 TAB detail dimensions ..................................................................................... 42 Figure 22 - SSD1702T3 TAB detail dimensions ..................................................................................... 44 Solomon Systech Dec 2003 P 4/46 Rev 1.1 SSD1702 1. General Description SSD1702 is a 240-outputs LCD driver capable of both COMMON or SEGMENT driving, selected by hardware pin setting. It is designed for high resolution dot matrix type LCD panel for the use on PDA or terminal. SSD1702 can be used in cascade mode to support display system with more than 240 rows or columns. In segment mode, 4-bit or 8-bit parallel input modes are available through pin selection. 2. FEATURES BOTH SEGMENT AND COMMON MODE Supply voltage for LC driver: +15.0 to +30.0 V Supply voltage for logic system: +2.4 to +3.6 V 240 outputs for either common or segment driving Pin selectable between common and segment mode Low output impedance Low power consumption SEGMENT MODE Maximum XCK clock frequency: 20 MHz (VDD = +3.0 to +3.6V) 15 MHz (VDD = +2.4 to +3.0V) Pin selectable 4-bit or 8-bit input modes Automatic transfer function of enable signal Automatically stop the internal clock after counting 240 bits of input data in chip select mode Line latch circuit reset function when DISPOFF# active COMMON MODE Maximum LP clock frequency: 1 MHz (VDD = +2.4 to 3.6V) Built-in 240 bits bi-directional shift register Single (240 bits shift register) or Dual mode (two 120 bits shift register) operations Shift register circuit reset function when DISPOFF# active 3. ORDERING INFORMATION Table 1 - Ordering Information Ordering Part Number Outerlead pitch (mm) Package Form SSD1702Z N/A Gold Bump Die SSD1702T1R1 0.21 TAB SSD1702T2R1 0.20 TAB SSD1702T3R1 0.055 TAB SSD1702 Rev 1.1 P 5/46 Dec 2003 Reference Figure 2 on page 7 Figure 20 on page 39 Figure 21 on page 41 Figure 22 on page 43 Remark - Solomon Systech Solomon Systech Dec 2003 P 6/46 Rev 1.1 SSD1702 4. BLOCK DIAGRAM Figure 1 - Block Diagram of SSD1702 Y240 Y239.......................................................Y2 Y1 V5 V5 V43 V12 V0 FR DISPOFF# V43 V12 240 BITS 4-LEVEL DRIVER V0 LEVEL SHIFTER 240 240 BITS LEVEL SHIFTER EIO1 EIO2 ACTIVE CONTROL 240 240 BITS LINE LATCH / SHIFT REGISTER 8 LP XCK CONTROL LOGIC 4BITS*2 DATA LATCH 8 ..............8 * 30............... 8 8 8 DATA LATCH ................................... S/C MD DATA LATCH CONTROL L/R 8 POWER ON RESET DATA CONTROL D0 D1 D2 D3 D4 D5 D6 D7 VDD SSD1702 Rev 1.1 P 7/46 Dec 2003 VSS Solomon Systech 5. DIE PAD COORDINATES V0 (x5) V12 (x5) Figure 2 - SSD1702Z die pad assignment X Y NC NC V43 (X5) V5 (X5) VSS (X7) MD MD L/R L/R FR FR FR EIO1 (X3) LP LP LP DISPOFF# DISPOFF# DISPOFF# XCK XCK XCK D7 (X3) D6 (X3) D5 (X3) D4 (X3) D3 (X3) D2 (X3) D1 (X3) D0 (X3) EIO2 (X3) S/C S/C VDD (X12) VSS (X9) V5 (X5) V43 (X5) NC NC Y X S S D 1702Z P ad 1,2,3,... -> 102 G old B um ps face up D ie S ize: D ie H eig h t: 12.65m m x 1.25 m m 533um B u m p S ize: P ad 1, 102, 113, 358 P ad 2-101 P ad 103-112, 359-368 P ad 114, 115, 356, 357 P ad 116-355 65um x 50um 49um x 105um 65um x 49um 50um x 95um 33um x 95um Alig n m en t M ark: T ype T shape + shape C ircle C ircle C oordinate -5989.0, 147.3 5989.0, 147.3 -5989.0,-215.0 5989.0,-215.0 S ize 75um x 75um 75um x 75um R -37.5um R -37.5um V0 (x5) V12 (x5) NC NC NC Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 Y10 . . . . . . . . . . . . . Y231 Y232 Y233 Y234 Y235 Y236 Y237 Y238 Y239 Y240 NC NC NC Solomon Systech Dec 2003 P 8/46 Rev 1.1 SSD1702 Figure 3 - Alignment mark detail dimensions T shape + shape Circle Unit in m SSD1702 Rev 1.1 P 9/46 Dec 2003 Solomon Systech Table 2 - SSD1702Z die pad coordinates Pad no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 Pad name NC NC V43 V43 V43 V43 V43 V5 V5 V5 V5 V5 VSS VSS VSS VSS VSS VSS VSS VSS VSS VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD S/C S/C EIO2 EIO2 EIO2 D0 D0 D0 D1 D1 D1 D2 D2 D2 D3 D3 D3 D4 D4 D4 D5 D5 D5 D6 D6 D6 Solomon Systech X -6181.5 -6102.7 -6026.5 -5950.3 -5874.1 -5797.9 -5721.7 -5645.5 -5569.3 -5493.1 -5416.9 -5340.7 -5177.3 -5101.1 -5024.9 -4948.7 -4872.5 -4796.3 -4720.1 -4643.9 -4567.7 -4259.9 -4183.7 -4107.5 -4031.3 -3955.1 -3878.9 -3802.7 -3726.5 -3650.3 -3574.1 -3497.9 -3421.7 -3345.5 -2950.9 -2874.7 -2650.7 -2574.5 -2498.3 -2106.7 -2030.5 -1954.3 -1730.3 -1654.1 -1577.9 -1186.3 -1110.1 -1033.9 -809.9 -733.7 -657.5 -265.9 -189.7 -113.5 110.5 186.7 262.9 654.5 730.7 806.9 Y -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 Pad no. 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 Pad name D7 D7 D7 XCK XCK XCK DISPOFF# DISPOFF# DISPOFF# LP LP LP EIO1 EIO1 EIO1 FR FR FR L/R L/R MD MD VSS VSS VSS VSS VSS VSS VSS VSS V5 V5 V5 V5 V5 V43 V43 V43 V43 V43 NC NC V12 V12 V12 V12 V12 V0 V0 V0 V0 V0 NC NC NC Y1 Y2 Y3 Y4 Y5 X 1030.9 1107.1 1183.3 1574.9 1651.1 1727.3 1951.3 2027.5 2103.7 2495.3 2571.5 2647.7 2871.7 2947.9 3024.1 3331.9 3408.1 3484.3 3875.9 3952.1 4176.1 4252.3 4643.9 4720.1 4796.3 4872.5 4948.7 5024.9 5101.1 5177.3 5340.7 5416.9 5493.1 5569.3 5645.5 5721.7 5797.9 5874.1 5950.3 6026.5 6102.7 6181.5 6181.5 6181.5 6181.5 6181.5 6181.5 6181.5 6181.5 6181.5 6181.5 6181.5 6181.5 6081.0 5980.5 5880.0 5832.0 5784.0 5736.0 5688.0 Y -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -473.9 -337.9 -261.7 -185.5 -109.3 -33.1 43.1 119.3 195.5 271.7 347.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 Pad no. 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 Pad name Y6 Y7 Y8 Y9 Y10 Y11 Y12 Y13 Y14 Y15 Y16 Y17 Y18 Y19 Y20 Y21 Y22 Y23 Y24 Y25 Y26 Y27 Y28 Y29 Y30 Y31 Y32 Y33 Y34 Y35 Y36 Y37 Y38 Y39 Y40 Y41 Y42 Y43 Y44 Y45 Y46 Y47 Y48 Y49 Y50 Y51 Y52 Y53 Y54 Y55 Y56 Y57 Y58 Y59 Y60 Y61 Y62 Y63 Y64 Y65 Dec 2003 P 10/46 Rev 1.1 X 5640.0 5592.0 5544.0 5496.0 5448.0 5400.0 5352.0 5304.0 5256.0 5208.0 5160.0 5112.0 5064.0 5016.0 4968.0 4920.0 4872.0 4824.0 4776.0 4728.0 4680.0 4632.0 4584.0 4536.0 4488.0 4440.0 4392.0 4344.0 4296.0 4248.0 4200.0 4152.0 4104.0 4056.0 4008.0 3960.0 3912.0 3864.0 3816.0 3768.0 3720.0 3672.0 3624.0 3576.0 3528.0 3480.0 3432.0 3384.0 3336.0 3288.0 3240.0 3192.0 3144.0 3096.0 3048.0 3000.0 2952.0 2904.0 2856.0 2808.0 Y 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 SSD1702 Pad no. 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 SSD1702 Pad name Y66 Y67 Y68 Y69 Y70 Y71 Y72 Y73 Y74 Y75 Y76 Y77 Y78 Y79 Y80 Y81 Y82 Y83 Y84 Y85 Y86 Y87 Y88 Y89 Y90 Y91 Y92 Y93 Y94 Y95 Y96 Y97 Y98 Y99 Y100 Y101 Y102 Y103 Y104 Y105 Y106 Y107 Y108 Y109 Y110 Y111 Y112 Y113 Y114 Y115 Y116 Y117 Y118 Y119 Y120 Y121 Y122 Y123 Y124 Y125 X 2760.0 2712.0 2664.0 2616.0 2568.0 2520.0 2472.0 2424.0 2376.0 2328.0 2280.0 2232.0 2184.0 2136.0 2088.0 1896.0 1848.0 1800.0 1752.0 1704.0 1656.0 1608.0 1560.0 1512.0 1464.0 1416.0 1368.0 1320.0 1272.0 1224.0 1176.0 1128.0 1080.0 1032.0 984.0 936.0 888.0 840.0 792.0 744.0 696.0 648.0 600.0 552.0 504.0 456.0 408.0 360.0 312.0 264.0 216.0 168.0 120.0 72.0 24.0 -24.0 -72.0 -120.0 -168.0 -216.0 Rev 1.1 Y 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 P 11/46 Pad no. 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 Dec 2003 Pad name Y126 Y127 Y128 Y129 Y130 Y131 Y132 Y133 Y134 Y135 Y136 Y137 Y138 Y139 Y140 Y141 Y142 Y143 Y144 Y145 Y146 Y147 Y148 Y149 Y150 Y151 Y152 Y153 Y154 Y155 Y156 Y157 Y158 Y159 Y160 Y161 Y162 Y163 Y164 Y165 Y166 Y167 Y168 Y169 Y170 Y171 Y172 Y173 Y174 Y175 Y176 Y177 Y178 Y179 Y180 Y181 Y182 Y183 Y184 Y185 X -264.0 -312.0 -360.0 -408.0 -456.0 -504.0 -552.0 -600.0 -648.0 -696.0 -744.0 -792.0 -840.0 -888.0 -936.0 -984.0 -1032.0 -1080.0 -1128.0 -1176.0 -1224.0 -1272.0 -1320.0 -1368.0 -1416.0 -1464.0 -1512.0 -1560.0 -1608.0 -1656.0 -1704.0 -1752.0 -1800.0 -1848.0 -1896.0 -2088.0 -2136.0 -2184.0 -2232.0 -2280.0 -2328.0 -2376.0 -2424.0 -2472.0 -2520.0 -2568.0 -2616.0 -2664.0 -2712.0 -2760.0 -2808.0 -2856.0 -2904.0 -2952.0 -3000.0 -3048.0 -3096.0 -3144.0 -3192.0 -3240.0 Y 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 Pad no. 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 Pad name Y186 Y187 Y188 Y189 Y190 Y191 Y192 Y193 Y194 Y195 Y196 Y197 Y198 Y199 Y200 Y201 Y202 Y203 Y204 Y205 Y206 Y207 Y208 Y209 Y210 Y211 Y212 Y213 Y214 Y215 Y216 Y217 Y218 Y219 Y220 Y221 Y222 Y223 Y224 Y225 Y226 Y227 Y228 Y229 Y230 Y231 Y232 Y233 Y234 Y235 Y236 Y237 Y238 Y239 Y240 NC NC NC V0 V0 X -3288.0 -3336.0 -3384.0 -3432.0 -3480.0 -3528.0 -3576.0 -3624.0 -3672.0 -3720.0 -3768.0 -3816.0 -3864.0 -3912.0 -3960.0 -4008.0 -4056.0 -4104.0 -4152.0 -4200.0 -4248.0 -4296.0 -4344.0 -4392.0 -4440.0 -4488.0 -4536.0 -4584.0 -4632.0 -4680.0 -4728.0 -4776.0 -4824.0 -4872.0 -4920.0 -4968.0 -5016.0 -5064.0 -5112.0 -5160.0 -5208.0 -5256.0 -5304.0 -5352.0 -5400.0 -5448.0 -5496.0 -5544.0 -5592.0 -5640.0 -5688.0 -5736.0 -5784.0 -5832.0 -5880.0 -5980.5 -6081.0 -6181.5 -6181.5 -6181.5 Y 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 495.9 347.9 271.7 Solomon Systech Pad no. 361 362 363 364 365 366 367 368 Pad name V0 V0 V0 V12 V12 V12 V12 V12 Solomon Systech X -6181.5 -6181.5 -6181.5 -6181.5 -6181.5 -6181.5 -6181.5 -6181.5 Y 195.5 119.3 43.1 -33.1 -109.3 -185.5 -261.7 -337.9 Dec 2003 P 12/46 Rev 1.1 SSD1702 6. TAB package pin assignment SSD1702T1 TAB Figure 4 - SSD1702T1 pin assignment (Copper view) SSD1702 Rev 1.1 P 13/46 Dec 2003 Solomon Systech Table 3 - SSD1702T1 pin assignment Pin no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 Pin Name NC V0 V0 V12 V43 V5 NC VDD S/C EIO2 D0 D1 D2 D3 D4 D5 D6 D7 XCK DISPOFF# LP EIO1 FR L/R MD NC VSS NC V5 V43 V12 V0 V0 NC NC Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 Y10 Y11 Y12 Y13 Y14 Solomon Systech Pin no. 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 Pin Name Y26 Y27 Y28 Y29 Y30 Y31 Y32 Y33 Y34 Y35 Y36 Y37 Y38 Y39 Y40 Y41 Y42 Y43 Y44 Y45 Y46 Y47 Y48 Y49 Y50 Y51 Y52 Y53 Y54 Y55 Y56 Y57 Y58 Y59 Y60 Y61 Y62 Y63 Y64 Y65 Y66 Y67 Y68 Y69 Y70 Y71 Y72 Y73 Y74 Pin no. 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 Pin Name Y86 Y87 Y88 Y89 Y90 Y91 Y92 Y93 Y94 Y95 Y96 Y97 Y98 Y99 Y100 Y101 Y102 Y103 Y104 Y105 Y106 Y107 Y108 Y109 Y110 Y111 Y112 Y113 Y114 Y115 Y116 Y117 Y118 Y119 Y120 Y121 Y122 Y123 Y124 Y125 Y126 Y127 Y128 Y129 Y130 Y131 Y132 Y133 Y134 Pin no. 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 Dec 2003 Pin Name Y146 Y147 Y148 Y149 Y150 Y151 Y152 Y153 Y154 Y155 Y156 Y157 Y158 Y159 Y160 Y161 Y162 Y163 Y164 Y165 Y166 Y167 Y168 Y169 Y170 Y171 Y172 Y173 Y174 Y175 Y176 Y177 Y178 Y179 Y180 Y181 Y182 Y183 Y184 Y185 Y186 Y187 Y188 Y189 Y190 Y191 Y192 Y193 Y194 P 14/46 Rev 1.1 Pin no. 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 Pin Name Y206 Y207 Y208 Y209 Y210 Y211 Y212 Y213 Y214 Y215 Y216 Y217 Y218 Y219 Y220 Y221 Y222 Y223 Y224 Y225 Y226 Y227 Y228 Y229 Y230 Y231 Y232 Y233 Y234 Y235 Y236 Y237 Y238 Y239 Y240 NC SSD1702 SSD1702T2 TAB Figure 5 - SSD1702T2 pin assignment (Copper view) SSD1702 Rev 1.1 P 15/46 Dec 2003 Solomon Systech Table 4 - SSD1702T2 pin assignment Pin no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 Pin Name NC V0 V12 V43 V5 NC VDD S/C EIO2 D0 D1 D2 D3 D4 D5 D6 D7 XCK DISPOFF# LP EIO1 FR L/R MD VSS V5 V43 V12 V0 NC NC NC NC Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 Y10 Y11 Y12 Y13 Y14 Y15 Y16 Solomon Systech Pin no. 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 Pin Name Y28 Y29 Y30 Y31 Y32 Y33 Y34 Y35 Y36 Y37 Y38 Y39 Y40 NC NC NC NC Y41 Y42 Y43 Y44 Y45 Y46 Y47 Y48 Y49 Y50 Y51 Y52 Y53 Y54 Y55 Y56 Y57 Y58 Y59 Y60 Y61 Y62 Y63 Y64 Y65 Y66 Y67 Y68 Y69 Y70 Y71 Y72 Pin no. 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 Pin Name Y84 Y85 Y86 Y87 Y88 Y89 Y90 Y91 Y92 Y93 Y94 Y95 Y96 Y97 Y98 Y99 Y100 Y101 Y102 Y103 Y104 Y105 Y106 Y107 Y108 Y109 Y110 Y111 Y112 Y113 Y114 Y115 Y116 Y117 Y118 Y119 Y120 Y121 Y122 Y123 Y124 Y125 Y126 Y127 Y128 Y129 Y130 Y131 Y132 Pin no. 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 Dec 2003 Pin Name Y144 Y145 Y146 Y147 Y148 Y149 Y150 Y151 Y152 Y153 Y154 Y155 Y156 Y157 Y158 Y159 Y160 Y161 Y162 Y163 Y164 Y165 Y166 Y167 Y168 Y169 Y170 Y171 Y172 Y173 Y174 Y175 Y176 Y177 Y178 Y179 Y180 Y181 Y182 Y183 Y184 Y185 Y186 Y187 Y188 Y189 Y190 Y191 Y192 P 16/46 Rev 1.1 Pin no. 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 Pin Name NC Y201 Y202 Y203 Y204 Y205 Y206 Y207 Y208 Y209 Y210 Y211 Y212 Y213 Y214 Y215 Y216 Y217 Y218 Y219 Y220 Y221 Y222 Y223 Y224 Y225 Y226 Y227 Y228 Y229 Y230 Y231 Y232 Y233 Y234 Y235 Y236 Y237 Y238 Y239 Y240 NC NC NC SSD1702 SSD1702T3 TAB Figure 6 - SSD1702T3 pin assignment (Copper view) SSD1702 Rev 1.1 P 17/46 Dec 2003 Solomon Systech Table 5 - SSD1702T3 pin assignment Pin no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 Pin Name NC V0 V12 V43 V5 NC VDD S/C EIO2 D0 D1 D2 D3 D4 D5 D6 D7 XCK DISPOFF# LP EIO1 FR L/R MD VSS V5 V43 V12 V0 NC NC NC NC Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 Y10 Y11 Y12 Y13 Y14 Y15 Y16 Solomon Systech Pin no. 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 Pin Name Y28 Y29 Y30 Y31 Y32 Y33 Y34 Y35 Y36 Y37 Y38 Y39 Y40 Y41 Y42 Y43 Y44 Y45 Y46 Y47 Y48 Y49 Y50 Y51 Y52 Y53 Y54 Y55 Y56 Y57 Y58 Y59 Y60 Y61 Y62 Y63 Y64 Y65 Y66 Y67 Y68 Y69 Y70 Y71 Y72 Y73 Y74 Y75 Y76 Pin no. 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 Pin Name Y88 Y89 Y90 Y91 Y92 Y93 Y94 Y95 Y96 Y97 Y98 Y99 Y100 Y101 Y102 Y103 Y104 Y105 Y106 Y107 Y108 Y109 Y110 Y111 Y112 Y113 Y114 Y115 Y116 Y117 Y118 Y119 Y120 Y121 Y122 Y123 Y124 Y125 Y126 Y127 Y128 Y129 Y130 Y131 Y132 Y133 Y134 Y135 Y136 Pin no. 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 Dec 2003 Pin Name Y148 Y149 Y150 Y151 Y152 Y153 Y154 Y155 Y156 Y157 Y158 Y159 Y160 Y161 Y162 Y163 Y164 Y165 Y166 Y167 Y168 Y169 Y170 Y171 Y172 Y173 Y174 Y175 Y176 Y177 Y178 Y179 Y180 Y181 Y182 Y183 Y184 Y185 Y186 Y187 Y188 Y189 Y190 Y191 Y192 Y193 Y194 Y195 Y196 P 18/46 Rev 1.1 Pin no. 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 Pin Name Y208 Y209 Y210 Y211 Y212 Y213 Y214 Y215 Y216 Y217 Y218 Y219 Y220 Y221 Y222 Y223 Y224 Y225 Y226 Y227 Y228 Y229 Y230 Y231 Y232 Y233 Y234 Y235 Y236 Y237 Y238 Y239 Y240 NC NC NC SSD1702 6. PIN DESCRIPTION Pin Name SEGMENT MODE COMMON MODE VDD This is the logic system power supply pin. VSS Ground pin V0, V12, V43, V5 These are the power supply pins for LC driving voltage. Normally, the bias voltages used are set by a resistor divider. Voltage level must be set such that VSS V5 V43 V12 V0. Refer to Section 8 for more details. S/C This pin switches the driver between Segment and Common mode. It should be set to H when segment mode is used. It should be set to L when common mode is used. MD This is for the selection of input interface. When MD is set to H, 4-bit parallel input mode is selected. When MD is set to L, 8-bit parallel input mode is selected. The relationship between display data and driver output is shown in Table 8 and Table 9. This is for the selection between Single mode and Dual mode operation. When MD is set to L, Single mode operation is selected. When MD is set to H, Dual mode operation is selected. In Single mode, the internal shift register will work as a 240-bit one. The scan pulse will run between Y1 to Y240. In Dual mode, the internal shift register will be divided into two independent half, each with 120 bits. Two independent scan pulses are allowed running simultaneously. One scan pulse run between Y1 to Y120 and the other run between Y121 to Y240. This makes the chip effectively work like two 120 channels common driver, which and thus allowing split screen application. Application examples can be found in Figure 12 to Figure 15. SSD1702 Rev 1.1 P 19/46 Dec 2003 Solomon Systech Pin Name SEGMENT MODE L/R L/R selects the scan direction of display data output. When L/R is set to L, data is read sequentially at the direction of Y240 to Y1. When L/R is set to H, data is read sequentially at the direction of Y1 to Y240. COMMON MODE L/R selects shift direction of shift register. When L/R is set to L, data is shifted from Y240 to Y1. When L/R is set to H, data is shifted from Y1 to Y240. Refer to Table 10 for more illustration. Refer to Table 8 and Table 9 for more illustration. DISPOFF# This is the display off control pin. This is the display off control pin. When DISPOFF# is set to H, the input signal is level-shifted from logic voltage level to LCD driving voltage level and controls LCD drive circuit. When DISPOFF# is set to H, the input signal is level-shifted from logic voltage level to LCD driving voltage level and controls the LCD driving circuit. When it is set to L, the contents stored in the line latch will be reset and Y1-Y240 will output V5 level. However, data can still be read into data latch regardless of the condition of DISPOFF#. When it is set to L, the contents stored in the shift register will be reset and Y1-Y240 will output V5. After the DISPOFF# function is cancelled, the driver will output deselected level (V12 or V43, depends on the level of FR) until it encounters a falling edge of LP. DISPOFF# removal time must meet the AC characteristics shown in Table 14 and Table 15. Otherwise, the driver may not be able to output the correct data. D0 - D7 These are display data input pins. For 4 bits operation, only D0 - D3 are used and D4 - D7 should be connected to either VDD or VSS. After the DISPOFF# function is cancelled, the driver will output deselected level (V12 or V43, depends on the level of FR) until it encounters a falling edge of LP. DISPOFF# removal time must meet the AC characteristics shown in Table 16. Otherwise, the driver may not be able to output the correct data. D0 - D6 are not used in common mode. They should be tied to VSS. D7 is used as input pin in dual mode. Data st is input starting from the 121 bit according to the data shift register. XCK This is the shift clock input pin. Data is read at the falling edge of the clock pulse. It is not used in common mode. It should be connected to VSS or left open. LP This is the latch pulse input pin. Data is latched at the falling edge of the clock pulse. This is the bi-directional shift register clock pulse input pin. Data is shifted at the falling edge of this clock pulse. Solomon Systech Dec 2003 P 20/46 Rev 1.1 SSD1702 Pin Name FR SEGMENT MODE COMMON MODE FR is the AC signal input for LC driving waveform. Normally it is the frame inversion signal. The input signal is level-shifted from logic voltage level to LC driving voltage level to control the LC driving circuit. The output voltage of the LC driver output pins are set by the line latch / shift register output signal and the FR signal. Their relationship is shown in Table 6 and Table 7. EIO1, EIO2 These are the I/O pins for chip selection. When L/R is set to L, EIO1 will be the output and EIO2 will be the input. When L/R is set to H, EIO1 will be the input and EIO2 will be the output. After an LP EIO(input) is selected. automatically data. signal is input and the set to L, the chip will be It will be deselected after reading 240 bits of EIO(output) is normally H. It will only be pull L for one XCK cycle (from falling edge to falling edge of XCK) when 240 bits of data have been read. These are the bi-directional shift register shift data I/O pin. When L/R is set to L, EIO1 will be the output and EIO2 will be the input. When L/R is set to H, EIO1 will be the input and EIO2 will be the output. A YD signal (Vertical scanning start pulse) is expected at the EIO(input). A H level at EIO(input) during LP falling edge indicates the start of a vertical frame. Refer to Figure 11 for details timing. Refer to Figure 10 for details timing. Y1-Y240 Note: These are LC driver output pins. The output level can be referred Table 6 and Table 7. Logic H means VDD level Logic L means VSS level SSD1702 Rev 1.1 P 21/46 Dec 2003 Solomon Systech 7. FUNCTIONAL BLOCK DESCRIPTIONS Active control In segment mode, this block controls the selection of the chip. Following an LP signal input, and after the chip select signal is input, a select signal is generated internally until 240 bits of data have been read in. Once the data input is completed, a selection signal for cascade connection will be output and the chip will be deselected. In common mode, this block controls the input/output data of bi-directional pins. Data Control When the chip is in segment mode with 4-bit parallel mode enable, this block collects one 4-bit data and transfers the data to Data Latch block in 4-bit format. When the chip is in segment mode with 8-bit parallel mode enable, this block collects one 8-bit data every XCK cycle and transfers the data to Data Latch block in 8-bit format. This block has no function in common mode. Data Latch This block is only active in segment mode. It latches the data on the data bus which used to determine the output level of each output pins. The latched state of each LC driver output pin is controlled by the Data latch control. Data Latch Control This block is only active in segment mode. There are 30 data latch unit in the chip. Each can store two 4-bit data. Data latch control determines which of the data latch unit should receive the data from Data Control block. The shift direction is controlled by the Control Logic block. After reading every 4 or 8 bits of data (depending on 4-bit or 8-bit parallel mode), the selection signal will shift one bit to next data latch based on the state of the control circuit logic. Line Latch/Shift Register In segment mode, it simultaneously latches all 240 bits of data into data latch at the falling edge of the LP signal and output to the level shift block. In common mode, it shifts data from the data input pin by one bit at the falling edge of the LP signal. Level Shifter The logic voltage signal is level-shifted to the LCD driving voltage level and outputs to the driver block. 4-level Driver This block is used to output appropriate LCD driving voltage level (V0, V12, V43, V5) based on the combinations of S/C, FR and DISPOFF# signals and the data from the line latch or shift register. Solomon Systech Dec 2003 P 22/46 Rev 1.1 SSD1702 Control Logic This block controls the operation of other blocks. In segment mode, when a LP pulse has been input, it controls the Line latch to latches 240 bits data simultaneously and then resets the Data latch control block. In common mode, this block controls the direction of data shift. Power on reset Reset all blocks during power on. All outputs (Y1 - Y240) will be set to deselect level. SSD1702 Rev 1.1 P 23/46 Dec 2003 Solomon Systech 8. FUNCTIONAL OPERATIONS Output voltage level mapping Table 6 - Output level truth table for segment mode FR Latch Data DISPOFF# Driver output voltage level L L H V43 L H H V5 H L H V12 H H H V0 X X L V5 Figure 7 - Illustration of output voltages in segment mode R R V0 Connect to V0 of segment driver V1 Not use in segment driver V2 Connect to V12 of segment driver V3 Connect to V43 of segment driver V4 Not use in segment driver V5 Connect to V5 of segment driver (n-4)R R R Latch Data H L H H L H X FR L L L H H H X DISPOFF# H H H H H H L Remark: * * * * In segment mode, the voltage levels V1 and V4 are not used. V12 pin should be connected to voltage level V2 and V43 pin should be connected to voltage level V3. 1/n bias is assumed VSS V5 V4 V3 V2 V1 V0 H: VDD; L: VSS; X: Don't care. These pins should be tied to either H or L and avoided from floating. Solomon Systech Dec 2003 P 24/46 Rev 1.1 SSD1702 Table 7 - Output level truth table for common mode FR Latch Data DISPOFF# Driver output voltage level L L H V43 L H H V0 H L H V12 H H H V5 X X L V5 Figure 8 - Illustration of output voltages in common mode R R V0 Connect to V0 of common driver V1 Connect to V12 of common driver V2 Not use in common driver V3 Not use in common driver V4 Connect to V43 of common driver V5 Connect to V5 of common driver (n-4)R R R Latch Data L H L L H L X FR L L L H H H X DISPOFF# H H H H H H L Remark: * * * * In segment mode, the voltage levels V2 and V3 are not used. V12 pin should be connected to voltage level V1 and V43 pin should be connected to voltage level V4. 1/n bias is assumed VSS V5 V4 V3 V2 V1 V0 H: VDD; L: VSS; X: Don't care. These pins should be tied to either H or L and avoided from floating. SSD1702 Rev 1.1 P 25/46 Dec 2003 Solomon Systech 9. DISPLAY DATA AND DRIVER OUTPUT PINS MAPPING Table 8 - 4-bit parallel, Segment Mode MD L/R EIO1 EIO2 H L Output Input H H Input Output Data Input D0 D1 D2 D3 D0 D1 D2 D3 st 2 Y233 Y234 Y235 Y236 Y8 Y7 Y6 Y5 st 2 Y225 Y226 Y227 Y228 Y229 Y230 Y231 Y232 Y16 Y15 Y14 Y13 Y12 Y11 Y10 Y9 1 Y237 Y238 Y239 Y240 Y4 Y3 Y2 Y1 nd Number of clock rd th 3 ... 58 Y229 ... Y9 Y230 ... Y10 Y231 ... Y11 Y232 ... Y12 Y12 ... Y232 Y11 ... Y231 Y10 ... Y230 Y9 ... Y229 59 Y5 Y6 Y7 Y8 Y236 Y235 Y234 Y233 Number of clock rd th 3 ... 28 Y217 ... Y17 Y218 ... Y18 Y219 ... Y19 Y220 ... Y20 Y221 ... Y21 Y222 ... Y22 Y223 ... Y23 Y224 ... Y24 Y24 ... Y224 Y23 ... Y223 Y22 ... Y222 Y21 ... Y221 Y20 ... Y220 Y19 ... Y219 Y18 ... Y218 Y17 ... Y217 29 Y9 Y10 Y11 Y12 Y13 Y14 Y15 Y16 Y232 Y231 Y230 Y229 Y228 Y227 Y226 Y225 th 60 Y1 Y2 Y3 Y4 Y240 Y239 Y238 Y237 th th 30 Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y240 Y239 Y238 Y237 Y236 Y235 Y234 Y233 Table 9 - 8-bit parallel, Segment Mode MD L/R EIO1 EIO2 L L Output Input L H Input Output Data Input D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 1 Y233 Y234 Y235 Y236 Y237 Y238 Y239 Y240 Y8 Y7 Y6 Y5 Y4 Y3 Y2 Y1 nd th Table 10 - Common Mode MD L L/R L H L H H Data transfer direction Y240 Y1 Y1 Y240 Y240 Y121 Y120 Y1 Y1 Y120 Y121 Y240 EIO1 Output Input EIO2 Input Output D7 X X Output Input Input Input Output Input Where H: VDD L: VSS X: Don't care. The pin should be tied to either H or L and avoided from floating. Solomon Systech Dec 2003 P 26/46 Rev 1.1 SSD1702 10. PRECAUTION This IC is a high voltage LC driver. If voltage is supplied to the LC driver power supply while the power supply of the logic system is floating, there may have high current flow inside the IC and permanently damaged the system. Besides, the logic condition inside IC is undefined when the logic power is just applied, therefore a DISPOFF# signal is suggested for resetting the IC. The recommend power up and down sequence is as follow: Power up: * Provide power to the logic system (VDD, VSS) * Pull DISPOFF# to L * Provide the LCD driving power (V0, V12, V43, V5) * DISPOFF# can then be pulled H for normal operation Power down: Pull DISPOFF# to L Disconnect LCD driving power supply Disconnect Logic system power supply * * * Figure 9 - Recommended power up and down sequence VDD VDD VSS V0 V0 VSS VDD DISPOFF# SSD1702 VSS Rev 1.1 P 27/46 Dec 2003 Solomon Systech 11. MAXIMUM RATINGS Table 11 - Maximum Ratings (Voltage Referenced to VSS) Symbol VDD V0 V12 V43 V5 VI TA TSTG Parameter Logic supply voltage LC driving voltage supply Input voltage Operating Temperature Storage Temperature Value -0.3 to +4.0 -0.3 to +32.0 -0.3 to + V0+0.3 -0.3 to + V0+0.3 -0.3 to + V0+0.3 -0.3 to VDD+0.3 -30 to +85 -65 to +150 Unit V V V V V V C C * Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the limits in the Electrical Characteristics tables or Pin Description section. This device contains circuitry to protect the inputs against damage due to high static voltages or electric fields. However, it is advised that normal precautions to be taken to avoid application of any voltage higher than maximum rated voltages to this high impedance circuit. For proper operation, it is recommended that VIN and VOUT be constrained to the range VSS (VIN or VOUT) VDD. Reliability of operation is enhanced if unused inputs are connected to an appropriate logic voltage level (e.g. either VSS or VDD). Unused outputs must be left open. All dummy and NC pins should be left open and unconnected. Do not group dummy or NC pins together. This device may be light sensitive. Caution should be taken to avoid exposed of this device to any light source during normal operation. This device is not radiation protected. Solomon Systech Dec 2003 P 28/46 Rev 1.1 SSD1702 12. DC CHARACTERISTICS SEGMENT MODE Table 12 - DC Characteristics (Unless otherwise specified, voltage referenced to VSS, VDD = 2.4 to 3.6V, V0=+15.0 to +30.0V, TA = -30 to 85C) Symbol VDD Parameter V0 operation voltage ISTB Stand-by current at VDD pin IDD1 Consumed current at VDD (Chip is in deselected stage, i.e. non data-taking) IDD2 Consumed current at VDD (Chip is in selected stage, i.e. data-taking) VIH VIL VOH VOL ILIH ILIL RON SSD1702 Min Typ Max Unit - 2.4 - 3.6 V - 15.0 - 30.0 V - - 5 A - 450 900 A - 750 1500 A - - 2.5 mA 0.8xVDD - - V - - 0.2xVDD V IOH = -0.4mA IOL = +0.4mA 0.9xVDD - - 0.1xVDD V V VI = VDD - - 5 A VI = VSS - - 5 A VON = 0.5V, V0 = +30V VON = 0.5V, V0 = +20V - 1.1 1.1 1.5 2.0 k k VDD operation voltage V0 IO Test Condition Consumed current at V0 VDD = +3.6V, V0 = +30V, V1 = VSS, all input static VDD = +3.6V, V0 = +30V, fXCK = 20MHz, fLP = 333kHz, fFR=1389Hz, No-load, EIO(input)=VDD, 4-bit mode, D0-D4 switch at every XCK cycle VDD = +3.6V, V0 = +30V, fXCK = 20MHz, fLP = 333kHz, fFR=1389Hz, No-load, EIO(input)=VSS, 4-bit mode, D0-D4 switch at every XCK cycle VDD = +3.6V, V0 = +30V, fXCK = 20MHz, fLP = 333kHz, fFR=1389Hz, No-load, EIO(input)=VSS, 4-bit mode, D0-D4 switch at every XCK cycle Input voltage at D0-D7, XCK, LP, L/R, FR, MD, S/C, EIO1, EIO2, DISPOFF# Output voltage at EIO1, EIO2 Input leakage current at D0-D7, XCK, LP, L/R, FR, MD, S/C, EIO1, EIO2, DISPOFF# Output resistance Rev 1.1 P 29/46 Dec 2003 Solomon Systech COMMON MODE Table 13 - DC Characteristics (Unless otherwise specified, voltage referenced to VSS, VDD = 2.4 to 3.6V, V0=+15.0 to +30.0V, TA = -30 to 85C) Symbol Test Condition Min Typ Max Unit VDD operation voltage - 2.4 - 3.6 V V0 V0 operation voltage - 15.0 - 30.0 V ISTB Stand-by current at VDD pin - - 5.0 A IDD1 Consumed current at VDD pin - 15 100 A - - 500 A 0.8xVDD - - V - - 0.2xVDD V IOH = -0.4mA IOL = +0.4mA VI = VDD 0.9xVDD - - 0.1xVDD 5 V V A VI = VSS - - 5 A VON = 0.5V, V0 = +30V VON = 0.5V, V0 = +20V - 1.1 1.1 1.5 2.0 k k VDD IO VIH VIL VOH VOL ILIH ILIL RON Parameter Consumed current at V0 pin Input voltage at D0-D7, XCK, LP, L/R, FR, MD, S/C, EIO1, EIO2, DISPOFF# Output voltage at EIO1, EIO2 Input leakage current at D0-D7, XCK, LP, L/R, FR, MD, S/C, EIO1, EIO2, DISPOFF# Output resistance at Y1Y240 Solomon Systech VDD = +3.6V, V0 = +30V, VI = VSS, all input static VDD = +3.6V, V0 = +30V, fLP = 333kHz, fFR=1389Hz, 1/240 duty operation, No-load VDD = +3.6V, V0 = +30V, fLP = 333kHz, fFR=1389Hz, 1/240 duty operation, No-load Dec 2003 P 30/46 Rev 1.1 SSD1702 13. AC CHARACTERISTICS SEGMENT MODE Table 14 - Interface Timing Characteristics (Unless otherwise specified, voltage referenced to VSS, VDD = +3.0 to +3.6V, V0=+15.0 to +30.0V, TA = -30 to 85C) Symbol TWCK TWCKH TWCKL TDS TDH TWLPH TLD TSL TLS TLH TR TF TS TSD TWDL TD TPD1, TPD2 TPD3 Parameter Shift clock period (1) Shift clock H pulse width Shift clock L pulse width Data setup time Data hold time Latch pulse H pulse width Shift clock rise to Latch pulse rise time Shift clock fall to Latch pulse fall time Latch pulse rise to Shift clock rise time Latch pulse fall to Shift pulse fall time Input signal rise time (2) Input signal fall time (2) Enable setup time Test Condition TR, TF 10ns - Min 50 15 15 10 12 15 0 Typ - Max - Unit ns ns ns ns ns ns ns - 25 25 - - ns ns - 25 - - ns - 10 - 50 50 - ns ns ns DISPOFF# removal time DISPOFF# L pulse width Output delay time1 Output delay time 2 CL = 15pF CL = 15pF 100 1.2 - - 30 400 ns s ns ns Output delay time 3 CL = 15pF - - 400 ns Note: (1) (2) Take the cascade connection into consideration (TCK-TWCKH-TWCKL)/2 is maximum in the case of high speed operation. SSD1702 Rev 1.1 P 31/46 Dec 2003 Solomon Systech SEGMENT MODE Table 15 - Interface Timing Characteristics (VDD - VSS = +2.4 to +3.0V, V0=+15.0 to +30.0V, TA = -35 to 85C) Symbol TWCK TWCKH TWCKL TDS TDH TWLPH TLD TSL TLS TLH TR TF TS TSD TWDL TD TPD1, TPD2 TPD3 Parameter Shift clock period (1) Shift clock H pulse width Shift clock L pulse width Data setup time Data hold time Latch pulse H pulse width Shift clock rise to Latch pulse rise time Shift clock fall to Latch pulse fall time Latch pulse rise to Shift clock rise time Latch pulse fall to Shift pulse fall time Input signal rise time (2) Input signal fall time (2) Enable setup time DISPOFF# removal time DISPOFF# L pulse width Output delay time1 Output delay time 2 Output delay time 3 Test Condition TR, TF 10ns - Min 66 23 23 15 23 30 0 Typ - Max - Unit ns ns ns ns ns ns ns - 50 30 - - ns ns - 30 - - ns CL = 15pF CL = 15pF 15 100 1.2 - - 50 50 41 400 ns ns ns ns s ns s CL = 15pF - - 400 s Note: (1) (2) Take the cascade connection into consideration (TCK-TWCKH-TWCKL)/2 is maximum in the case of high speed operation. Solomon Systech Dec 2003 P 32/46 Rev 1.1 SSD1702 Figure 10 - Timing characteristics of SSD1702 in Segment mode TWLPH LP TSL TLD TLH TWCKH TLS TWCKL XCK TF TR TWCK D0~D7 TDS Last data of i-1th row TDH First data of ith row TWDL TSD DISPOFF# LP 1 Ts XCK n 2 EIO (input) TD EIO (output) FR TPD1 LP TPD2 DISPOFF# TPD3 Y1~Y240 In 4-bit mode, n = 240/4 = 60 In 8-bit mode, n = 240/8 = 30 SSD1702 Rev 1.1 P 33/46 Dec 2003 Solomon Systech COMMON MODE Table 16 - Interface Timing Characteristics (VDD - VSS = +2.4 to +3.6V, V0=+15.0 to +30.0V, TA = -35 to 85C) Symbol TWLP TWLPH Parameter Shift clock period Shift clock H pulse width TSU TH TR TF TSD TWDL TDL TPD1,TPD2 TPD3 Data setup time Data hold time Input signal rise time Input signal fall time DISPOFF# removal time DISPOFF# L pulse width Output delay time (1) Output delay time (2) Output delay time (3) Test Condition TR, TF 20ns VDD = +3.0 to 3.6V VDD = +2.4 to 3.0V CL=15 pF CL=15 pF CL=15 pF Min 250 15 30 30 50 100 1.2 - Typ - Max 50 50 200 1.2 1.2 Unit ns ns ns ns ns ns ns ns s ns s s Figure 11 - Timing characteristics of SSD1702 in Common mode TWLP LP TR TWLPH TSU TF TH EIO(input) / D7 TDL EIO(output) TSD TWDL DISPOFF# FR TPD1 LP TPD2 DISPOFF# TPD3 Y1~Y240 Solomon Systech Dec 2003 P 34/46 Rev 1.1 SSD1702 14. APPLICATION EXAMPLES OF COMMON DRIVERS Figure 12 - Application example of Single mode (L/R = L) First Y1 EIO2 EIO1 EIO2 EIO1 EIO2 EIO1 LP MD FR D7 L/R Y240 DISPOFF# Y1 LP MD FR D7 L/R Y240 DISPOFF# Y1 LP MD FR D7 L/R Y240 DISPOFF# YD Last DISPOFF# LP VSS FR VSS (VDD) VSS Figure 13 - Application example of Single mode (L/R = H) YD EIO1 Y1 EIO2 Y240 First SSD1702 Rev 1.1 EIO1 Y1 EIO2 Y240 EIO1 Y1 DISPOFF# L/R D7 FR MD LP DISPOFF# L/R D7 FR MD LP DISPOFF# L/R D7 FR MD LP DISPOFF# LP VSS FR VSS (VDD) VDD EIO2 Y240 Last P 35/46 Dec 2003 Solomon Systech Figure 14 - Application example of Dual mode (L/R = L) EIO2 Y1 EIO1 Y240 Y1 EIO2 EIO1 LP MD FR D7 L/R EIO1 Y121 Y120 Last (Group B) DISPOFF# EIO2 Y240 First (Group B) LP MD FR D7 L/R Y1 LP MD FR D7 L/R Y240 DISPOFF# YDA Last (Group A) DISPOFF# First (Group A) DISPOFF# LP VSS VDD FR VSS(VDD) VSS YDB Figure 15 - Application example of Dual mode (L/R = H) YDB VDD VSS (VDD) FR VDD VSS LP DISPOFF# Solomon Systech EIO2 EIO1 Y1 Y120 Y121 Y240 Last (Group A) Y1 First (Group B) Dec 2003 L/R D7 FR MD LP First (Group A) Y240 EIO1 DISPOFF# Y1 EIO2 L/R D7 FR MD LP EIO1 DISPOFF# L/R D7 FR MD LP DISPOFF# YDA EIO2 Y240 Last (Group B) P 36/46 Rev 1.1 SSD1702 15. APPLICATION EXAMPLES OF SEGMENT DRIVERS Figure 16 - Application example of Segment mode (L/R = L) First Data Y240 Y1 Y240 Y1 EIO2 EIO1 EIO2 EIO1 EIO2 EIO1 XCK LP VSS FR D0-D7 VSS XCK LP MD FR D0-D7 L/R Y1 XCK LP MD FR D0-D7 L/R Y240 XCK LP MD FR D0-D7 L/R VSS Last Data 8 Figure 17 - Application example of Segment mode (L/R = H) L/R D0-D7 FR MD LP XCK L/R D0-D7 FR MD LP XCK VSS 8 L/R D0-D7 FR MD LP XCK XCK LP VSS FR D0-D7 VDD EIO1 EIO2 EIO1 EIO2 EIO1 EIO2 Y1 Y240 Y1 Y240 Y1 Y240 First Data SSD1702 Rev 1.1 P 37/46 Last Data Dec 2003 Solomon Systech 16. TIMING CHART OF CASCADE CONNECTION OF SEGMENT DRIVERS Figure 18 - Timing chart of cascade connection of segment drivers FR LP XCK First data D0~D7 n 1 2 Last data n 1 2 Device A n 1 2 Device B n 1 2 n 1 2 Device C Device D H EIO (Device A input) L EIO (Device A output, cascade to device B input) EIO (Device B output, cascade to device C input) EIO (Device C output, cascade to device D) In 4-bit mode, n = 240/4 = 60 In 8-bit mode, n = 240/8 = 30 Solomon Systech Dec 2003 P 38/46 Rev 1.1 SSD1702 17. APPLICATION EXAMPLES Figure 19 - Typical configuration for 320x240 application VEE V 0 R V 1 VDD, VSS, V0, V1, V4, V5 Common driver R EIO1 V 4 M D S/C R V 5 L/R LP DISPOFF# D0-D7 XCK EIO2 VSS 320x240 Dot Matrix LCD Panel Y1-Y240 FR . . . COM239 COM240 . . . SEG319 SEG320 (n4)R SSD1702 V 3 COM1 COM2 . . . SEG1 SEG2 . . . R V 2 Y1-Y320 VDD LP FR Segment driver EIO1 M D SSD1703 S/C VDD, VSS, V0, V2, V3, V5 XCK D0-D7 DISPOFF# EIO2 LP L/R FR LCD Controller DISPOFF# XCK YD D0- D7 Remark: * The circuit is in 1/n bias * * * * VSS V5 V4 V3 V2 V1 V0 VEE VEE is the maximum driving voltage allowed, which is equal to or above V0. For common driver o V0 should be connected to pin V0 o V1 should be connected to pin V12 o V4 should be connected to pin V43 o V5 should be connected to pin V5 For segment driver o V0 should be connected to pin V0 o V2 should be connected to pin V12 o V3 should be connected to pin V43 o V5 should be connected to pin V5 SSD1702 Rev 1.1 P 39/46 Dec 2003 Solomon Systech 18. TAB PACKAGE DETAIL DIMENSIONS SSD1702T1 TAB Figure 20 - SSD1702T1 TAB detail dimensions SOLO Solomon Systech MON 170 SSD Dec 2003 P 40/46 2T1 Rev 1.1 SSD1702 SSD1702 Rev 1.1 P 41/46 Dec 2003 Solomon Systech SSD1702T2 TAB Figure 21 - SSD1702T2 TAB detail dimensions S OL Solomon Systech 170 SSD OMO N Dec 2003 2T2 P 42/46 Rev 1.1 SSD1702 SSD1702 Rev 1.1 P 43/46 Dec 2003 Solomon Systech SSD1702T3 TAB Figure 22 - SSD1702T3 TAB detail dimensions Solomon Systech Dec 2003 P 44/46 Rev 1.1 SSD1702 SSD1702 Rev 1.1 P 45/46 Dec 2003 Solomon Systech Solomon Systech Dec 2003 P 46/46 Rev 1.1 SSD1702 Solomon Systech reserves the right to make changes without further notice to any products herein. Solomon Systech makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Solomon Systech assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Solomon Systech does not convey any license under its patent rights nor the rights of others. Solomon Systech products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Solomon Systech product could create a situation where personal injury or death may occur. Should Buyer purchase or use Solomon Systech products for any such unintended or unauthorized application, Buyer shall indemnify and hold Solomon Systech and its offices, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Solomon Systech was negligent regarding the design or manufacture of the part. http://www.solomon-systech.com SSD1702 Rev 1.1 P 47/46 Dec 2003 Solomon Systech