ISO 9001 ISO 14001 AS 9100 CERTIFIED
Mini-Circuits
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661
The Design Engineers Search Engine Provides ACTUAL Data Instantly at
®
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
For detailed performance specs
& shopping online see web site
minicircuits.com
IF/RF MICROWAVE COMPONENTS
Surface Mount
Monolithic Amplier
Page 1 of 4
Product Features
• Wideband, 0.05 to 1GHz
• High output power, up to +17.5 dBm typ.
• Low noise, 3.6 dB typ.
• Aqueous washable
Typical Applications
• UHF - TV
• Cellular
• Defense communication
• UHF/VHF receivers/transmitters
simplified schematic and pin description
Function Pin Number Description
RF IN 1RF input pin. This pin requires the use of an external DC blocking capacitor chosen
for the frequency of operation.
RF-OUT and DC-IN 3
RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking
capacitor is necessary for proper operation. An RF choke is needed to feed DC bias
without loss of RF signal due to the bias connection, as shown in “Recommended
Application Circuit”.
GND 2,4 Connections to ground. Use via holes as shown in “Suggested Layout for PCB
Design” to reduce ground path inductance for best performance.
MAV-11SM+
GROUND
RF IN
RF-OUT and DC-IN
REV. B
M109465
MAV-11SM+
130702
0.05-1 GHz
CASE STYLE: RRR137-1
PRICE: Contact Sales Dept.
GND GND
RF-OUT and DC-IN
RF IN
1
2
3
4
General Description
MAV-11SM+ (RoHS compliant) is a wideband amplier offering high dynamic range. It has repeatable per-
formance from lot to lot. It is enclosed in a plastic molded package. MAV-11SM+ uses Darlington congu-
ration and is fabricated using silicon technology. Expected MTBF is 500 years at 85°C case temperature.
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
NON-CATALOG
Monolithic Amplier
Page 2 of 4
ISO 9001 ISO 14001 AS 9100 CERTIFIED
Mini-Circuits
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661
The Design Engineers Search Engine Provides ACTUAL Data Instantly at
®
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
For detailed performance specs
& shopping online see web site
minicircuits.com
IF/RF MICROWAVE COMPONENTS
Electrical Specications at 25°C and 60mA, unless noted
Absolute Maximum Ratings
Parameter Ratings
Operating Temperature* -20°C to 85°C
Storage Temperature -55°C to 100°C
Operating Current 80mA
Power Dissipation 550mW
Input Power 13dBm
Note: Permanent damage may occur if any of these limits are exceeded.
These ratings are not intended for continuous normal operation.
1Case is dened as ground leads.
2Full operating temperature range
Parameter Min. Typ. Max. Units
Frequency Range* 0.05 1GHz
Gain f=0.1 GHz 12.7 dB
f=1 GHz 9.0210.5
Input Return Loss f=0.05 to 1 GHz 14 dB
Output Return Loss f=0.05 to 1 GHz 11.5 dB
Output Power @ 1 dB compression f=0.5 GHz +17.5 dBm
Output IP3 f=0.5 GHz +30 dBm
Noise Figure f=0.5 GHz 3.6 dB
Recommended Device Operating Current 60 mA
Device Operating Voltage 5.5 V
Thermal Resistance, junction-to-case1125 °C/W
MAV-11SM+
*Guaranteed specication 0.05-1 GHz. Low frequency cut off determined by external coupling capacitors.
Monolithic Amplier
Page 3 of 4
ISO 9001 ISO 14001 AS 9100 CERTIFIED
Mini-Circuits
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661
The Design Engineers Search Engine Provides ACTUAL Data Instantly at
®
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
For detailed performance specs
& shopping online see web site
minicircuits.com
IF/RF MICROWAVE COMPONENTS
Product Marking
MAV-11SM+
R BIAS
Vcc “1%” Res. Values (ohms)
for Optimum Biasing
7 28.0
8 45.3
9 61.9
10 78.7
11 95.3
12 113
13 127
14 143
15 158
Case Style: RRR137-1
Suggested Layout for PCB Design: PL-169
Plastic molded package, .145 body diameter, lead nish: tin
Evaluation Board: TB-412-11+
Tape & Reel: F11
7” reels with 20, 50, 100, 200, 500 devices
Additional Detailed Technical Information
Additional information is available on our web site. To access this information enter the model number on
our web site home page.
Environmental Ratings: ENV08
Performance data, graphs, s-parameter data set (.zip le)
1
2
3
4
A
Markings in addition to model number designation may appear for internal quality control purposes.
Monolithic Amplier
Page 4 of 4
ISO 9001 ISO 14001 AS 9100 CERTIFIED
Mini-Circuits
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661
The Design Engineers Search Engine Provides ACTUAL Data Instantly at
®
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
For detailed performance specs
& shopping online see web site
minicircuits.com
IF/RF MICROWAVE COMPONENTS
No. Test Required Condition Standard Quantity
1Visual Inspection Low Power Microscope
Magnication 40x
MIP-IN-0003
(MCT spec) 20 units
2Electrical Test Room Temperature SCD
(MCL spec) 20 units
3 SAM Analysis Less than 10% growth in term of
delamination
J-Std-020C
(Jedec Standard) 20 units
4Moisture Sensitivity
Level 1
Bake at 125°C for 24 hours
Soak at 85°C/85%RH for 168 hours
Reow 3 cycles at 260°C peak
J-Std-020C
(Jedec Standard) 20 units
Visual
Inspection Electrical Test SAM Analysis
Reow 3 cycles,
260°C
Soak
85°C/85RH
168 hours
Bake at 125°C,
24 hours
Visual
Inspection Electrical Test SAM Analysis
Start
MSL Test Flow Chart
Human Body Model (HBM): Class 0 (< 250 v) in accordance with ANSI/ESD STM 5.1 - 2001
Charged Device Model (CDM): Class III (500v to 1000 v) in accordance with JESD22-C101C
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDECJ-STD-020C
ESD Rating
MAV-11SM+