LM119,LM219,LM319
LM119/LM219/LM319 High Speed Dual Comparator
Literature Number: SNOSBJ2A
LM119/LM219/LM319
High Speed Dual Comparator
General Description
The LM119 series are precision high speed dual compara-
tors fabricated on a single monolithic chip. They are de-
signed to operate over a wide range of supply voltages down
to a single 5V logic supply and ground. Further, they have
higher gain and lower input currents than devices like the
LM710. The uncommitted collector of the output stage
makes the LM119 compatible with RTL, DTLand TTLas well
as capable of driving lamps and relays at currents up to 25
mA.
The LM319A offers improved precision over the standard
LM319, with tighter tolerances on offset voltage, offset cur-
rent, and voltage gain.
Although designed primarily for applications requiring opera-
tion from digital logic supplies, the LM119 series are fully
specified for power supplies up to ±15V. It features faster re-
sponse than the LM111 at the expense of higher power dis-
sipation. However, the high speed, wide operating voltage
range and low package count make the LM119 much more
versatile than older devices like the LM711.
The LM119 is specified from −55˚C to +125˚C, the LM219 is
specified from −25˚C to +85˚C, and the LM319A and LM319
are specified from 0˚C to +70˚C.
Features
nTwo independent comparators
nOperates from a single 5V supply
nTypically 80 ns response time at ±15V
nMinimum fan-out of 2 each side
nMaximum input current of 1 µA over temperature
nInputs and outputs can be isolated from system ground
nHigh common mode slew rate
Connection Diagram
Note 1: Also available per SMD#8601401 or JM38510/10306
Typical Applications (Note 2)
Dual-In-Line Package
DS005705-4
Top View
Order Number LM119J, LM119J/883 (Note 1),
LM219J, LM319J, LM319AM,
LM319M, LM319AN or LM319N
See NS Package Number J14A, M14A or N14A
Relay Driver
DS005705-5
Note 2: Pin numbers are for metal can package.
Window Detector
DS005705-6
VOUT = 5V for VLT ≤VIN ≤VUT
VOUT = 0 for VIN ≤VLTor VIN ≥VUT
August 2000
LM119/LM219/LM319 High Speed Dual Comparator
© 2000 National Semiconductor Corporation DS005705 www.national.com
Absolute Maximum Ratings (Note 9)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Total Supply Voltage 36V
Output to Negative Supply Voltage 36V
Ground to Negative Supply Voltage 25V
Ground to Positive Supply Voltage 18V
Differential Input Voltage ±5V
Input Voltage (Note 3) ±15V
ESD rating (1.5 kΩin series with
100 pF) 800V
Power Dissipation (Note 4) 500 mW
Output Short Circuit Duration 10 sec
Storage Temperature Range −65˚C to 150˚C
Lead Temperature
(Soldering, 10 sec.) 260˚C
Soldering Information
Dual-In-Line Package
Soldering (10 seconds) 260˚C
Small Outline Package
Vapor Phase (60 seconds) 215˚C
Infrared (15 seconds) 220˚C
See AN-450 “Surface Mounting Methods and Their Effect
on Product Reliability” for other methods of soldering
surface mount devices.
Operating Temperature Range
LM119 −55˚C to 125˚C
LM219 −25˚C to 85˚C
Electrical Characteristics (Note 5)
Parameter Conditions LM119/LM219 Units
Min Typ Max
Input Offset Voltage (Note 6) T
A
= 25˚C, R
S
≤5k 0.7 4.0 mV
Input Offset Current (Note 6) T
A
= 25˚C 30 75 nA
Input Bias Current T
A
= 25˚C 150 500 nA
Voltage Gain T
A
= 25˚C (Note 8) 10 40 V/mV
Response Time (Note 7) T
A
= 25˚C, V
S
=±15V 80 ns
Saturation Voltage V
IN
≤−5 mV, I
OUT
=25mA
T
A
= 25˚C 0.75 1.5 V
Output Leakage Current V
IN
≥5 mV, V
OUT
= 35V
T
A
= 25˚C 0.2 2 µA
Input Offset Voltage (Note 6) R
S
≤5k 7 mV
Input Offset Current (Note 6) 100 nA
Input Bias Current 1000 nA
Input Voltage Range V
S
=±15V −12 ±13 +12 V
V
+
= 5V, V
−
=0 1 3 V
Saturation Voltage V
+
≥4.5V, V
−
=0
V
IN
≤−6 mV, I
SINK
≤3.2 mA
T
A
≥0˚C 0.23 0.4 V
T
A
≤0˚C 0.6 V
Output Leakage Current V
IN
≥5 mV, V
OUT
= 35V, 1 10 µA
V
−
=V
GND
=0V
Differential Input Voltage ±5V
Positive Supply Current T
A
= 25˚C, V
+
= 5V, V
−
= 0 4.3 mA
Positive Supply Current T
A
= 25˚C, V
S
=±15V 8 11.5 mA
Negative Supply Current T
A
= 25˚C, V
S
=±15V 3 4.5 mA
Note 3: For supply voltages less than ±15V the absolute maximum input voltage is equal to the supply voltage.
Note 4: The maximum junction temperature of the LM119 is 150˚C, while that of the LM219 is 110˚C. For operating at elevated temperatures, devices in the H10
package must be derated based on a thermal resistance of 160˚C/W, junction to ambient, or 19˚C/W, junction to case. The thermal resistance of the J14 and N14
packages is 100˚C/W, junction to ambient.
Note 5: These specifications apply for VS=±15V, and the Ground pin at ground, and −55˚C ≤TA≤+125˚C, unless otherwise stated. With the LM219, however, all
temperature specifications are limited to −25˚C ≤TA≤+85˚C. The offset voltage, offset current and bias current specifications apply for any supply voltage from a
single 5V supply up to ±15V supplies. Do not operate the device with more than 16V from ground to VS.
Note 6: The offset voltages and offset currents given are the maximum values required to drive the output within a volt of either supply witha1mAload. Thus, these
parameters define an error band and take into account the worst case effects of voltage gain and input impedance.
Note 7: The response time specified (see definitions) is for a 100 mV input step with 5 mV overdrive.
Note 8: Output is pulled up to 15V through a 1.4 kΩresistor.
Note 9: Refer to RETS119X for LM119H/883 and LM119J/883 specifications.
LM119/LM219/LM319
www.national.com 2
Absolute Maximum Ratings
LM319A/319 (Note 9)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Total Supply Voltage 36V
Output to Negative Supply Voltage 36V
Ground to Negative Supply Voltage 25V
Ground to Positive Supply Voltage 18V
Differential Input Voltage ±5V
Input Voltage (Note 10) ±15V
Power Dissipation (Note 11) 500 mW
Output Short Circuit Duration 10 sec
ESD rating (1.5 kΩin series with
100 pF) 800V
Storage Temperature Range −65˚C to 150˚C
Lead Temperature
(Soldering, 10 sec.) 260˚C
Soldering Information
Dual-In-Line Package
Soldering (10 sec.) 260˚C
Small Outline Package
Vapor Phase (60 sec.) 215˚C
Infrared (15 sec.) 220˚C
See AN-450 “Surface Mounting Methods and Their Effect
on Product Reliability” for other methods of soldering
surface mount devices.
Operating Temperature Range
LM319A, LM319 0˚C to 70˚C
Electrical Characteristics (Note 12)
Parameter Conditions LM319A LM319 Units
Min Typ Max Min Typ Max
Input Offset Voltage (Note 13) T
A
= 25˚C, R
S
≤5k 0.5 1.0 2.0 8.0 mV
Input Offset Current (Note 13) T
A
= 25˚C 20 40 80 200 nA
Input Bias Current T
A
= 25˚C 150 500 250 1000 nA
Voltage Gain T
A
= 25˚C (Note 15) 20 40 8 40 V/mV
Response Time (Note 14) T
A
= 25˚C, V
S
=±15V 80 80 ns
Saturation Voltage V
IN
≤−10 mV, I
OUT
=25mA
T
A
= 25˚C 0.75 1.5 0.75 1.5 V
Output Leakage Current V
IN
≥10 mV, V
OUT
= 35V,
V
−=V
GND = 0V, T
A
= 25˚C 0.2 10 0.2 10 µA
Input Offset Voltage (Note 13) R
S
≤5k 10 10 mV
Input Offset Current (Note 13) 300 300 nA
Input Bias Current 1000 1200 nA
Input Voltage Range V
S
=±15V ±13 ±13 V
V
+
= 5V, V
−
=0 1313V
Saturation Voltage V
+
≥4.5V, V
−
= 0 0.3 0.4 0.3 0.4 V
V
IN
≤−10 mV, I
SINK
≤3.2 mA
Differential Input Voltage ±5±5V
Positive Supply Current T
A
= 25˚C, V
+
= 5V, V
−
= 0 4.3 4.3 mA
Positive Supply Current T
A
= 25˚C, V
S
=±15V 8 12.5 8 12.5 mA
Negative Supply Current T
A
= 25˚C, V
S
=±15V 3 5 3 5 mA
Note 10: For supply voltages less than ±15 the absolute maximum input voltage is equal to the supply voltage.
Note 11: The maximum junction temperature of the LM319A and LM319 is 85˚C. For operating at elevated temperatures, devices in the H10 package must be de-
rated based on a thermal resistance of 160˚C/W, junction to ambient, or 19˚C/W, junction to case. The thermal resistance of the N14 and J14 package is 100˚C/W,
junction to ambient. The thermal resistance of the M14 package is 115˚C/W, junction to ambient.
Note 12: These specifications apply for VS=±15V, and 0˚C ≤TA≤70˚C, unless otherwise stated. The offset voltage, offset current and bias current specifications
apply for any supply voltage from a single 5V supply up to ±15V supplies. Do not operate the device with more than 16V from ground to VS.
Note 13: The offset voltages and offset currents given are the maximum values required to drive the output within a volt of either supply witha1mAload. Thus, these
parameters define an error band and take into account the worst case effects of voltage gain and input impedance.
Note 14: The response time specified is for a 100 mV input step with 5 mV overdrive.
Note 15: Output is pulled up to 15V through a 1.4 kΩresistor.
LM119/LM219/LM319
www.national.com3
Typical Performance Characteristics LM119A/LM119/LM219
Input Currents
DS005705-10
Common Mode Limits
DS005705-11
Transfer Function
DS005705-12
Response Time for Various
Input Overdrives
DS005705-13
Response Time for Various
Input Overdrives
DS005705-14
Input Characteristics
DS005705-15
Response Time for Various
Input Overdrives
DS005705-16
Response Time for Various
Input Overdrives
DS005705-17
Output Saturation Voltage
DS005705-18
LM119/LM219/LM319
www.national.com 4
Typical Performance Characteristics LM119A/LM119/LM219 (Continued)
Typical Performance Characteristics LM319A, LM319
Supply Current
DS005705-19
Supply Current
DS005705-20
Output Limiting
Characteristics
DS005705-21
Input Currents
DS005705-22
Supply Currents
DS005705-23
Transfer Function
DS005705-24
Response Time for Various
Input Overdrives
DS005705-25
Response Time for Various
Input Overdrives
DS005705-26
Input Characteristics
DS005705-27
LM119/LM219/LM319
www.national.com5
Typical Performance Characteristics LM319A, LM319 (Continued)
Response Time for Various
Input Overdrives
DS005705-28
Response Time for Various
Input Overdrives
DS005705-29
Output Saturation Voltage
DS005705-30
Supply Current
DS005705-31
Common Mode Limits
DS005705-32
Output Limiting
Characteristics
DS005705-33
LM119/LM219/LM319
www.national.com 6
Schematic Diagram
DS005705-1
*Do not operate the LM119 with more than 16V between GND and V+
LM119/LM219/LM319
www.national.com7
Connection Diagrams
Metal Can Package
DS005705-7
Case is connected to pin 5 (V−)
Top View
Order Number LM119H, LM119H/883 (Note 1),
or LM319H
See NS Package Number H10C
DS005705-9
Order Number LM119W/883
See NS Package Number W10A
LM119/LM219/LM319
www.national.com 8
Physical Dimensions inches (millimeters) unless otherwise noted
Metal Can Package (H)
Order Number LM119H, LM119H/883, LM319AH or LM319H
NS Package Number H10C
Cavity Dual-In-Line Package (J)
Order Number LM119J, LM119J/883, LM219J, LM319AJ or LM319J
NS Package Number J14A
LM119/LM219/LM319
www.national.com9
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Dual-In-Line Package (M)
Order Number LM319AM or LM319M
NS Package Number M14A
Molded Dual-In-Line Package (N)
Order Number LM319AN or LM319N
NS Package Number N14A
LM119/LM219/LM319
www.national.com 10
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: support@nsc.com
National Semiconductor
Europe Fax: +49 (0) 180-530 85 86
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 69 9508 6208
English Tel: +44 (0) 870 24 0 2171
Français Tel: +33 (0) 1 41 91 8790
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
Email: ap.support@nsc.com
National Semiconductor
Japan Ltd.
Tel: 81-3-5639-7560
Fax: 81-3-5639-7507
www.national.com
Order Number LM119W/883, LM119WG/883
NS Package Number W10A, WG10A
LM119/LM219/LM319 High Speed Dual Comparator
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic."Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products Applications
Audio www.ti.com/audio Communications and Telecom www.ti.com/communications
Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers
Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps
DLP®Products www.dlp.com Energy and Lighting www.ti.com/energy
DSP dsp.ti.com Industrial www.ti.com/industrial
Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical
Interface interface.ti.com Security www.ti.com/security
Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community Home Page e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright ©2011, Texas Instruments Incorporated
