Fused MnO2 Tantalum Surface Mount Capacitors T496 Fused MnO2 Series Overview The T496 Series of tantalum chip capacitors offers a "fail safe" design. The built-in fuse element offers excellent protection from damaging short circuit conditions in applications where damaging high fault currents exist. Protection from costly circuit damage due to reversed installation is offered with this device. Benefits * * * * * * * * * * * * * * * * Meets or exceeds EIA standard 535BAAC Approved to DSCC drawing 04053 Patented fuse assembly Optional gold-plated terminations Built-in fuse protects against short circuit mode 100% surge current test on C, D, and X sizes Halogen-free epoxy Capacitance values of 0.15F to 330F Tolerances of 10% and 20% Voltage rating of 4-50 VDC Fuse activation, 25C: within 1 second at fault currents of 4 amps and higher Continuous current capability: 0.75 amps Post actuation resistance, 25C: 10 M, minimum Test tabs on side of case bypass the capacitor element to allow direct testing of the fuse assembly RoHS compliance and lead-free terminations Operating temperature range of -55C to +125C Applications Typical applications include decoupling and filtering in computing and telecommunications end applications, such as high-end servers requiring built-in fuse capability. Environmental Compliance RoHS Compliant (6/6)* according to Directive 2002/95/EC *When ordered with 100% Sn Solder SPICE For a detailed analysis of specific part numbers, please visit kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions. One WORLD One Brand One Strategy One Focus One Team (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com One KEMET T2010_T496 * 9/6/2011 1 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Ordering Information T 496 X 227 M 010 A T Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/ Design Lead Material Packaging (C-Spec) Fail Safe B = 3528-21 C = 6032-28 D = 7343-31 X = 7343-43 First two digits represent significant figures. Third digit specifies number of zeros. K = 10% M = 20% T = 100% Matte Tin (Sn) Plated H = Standard Solder Coated (SnPb 5% Pb minimum) Blank = 7" Reel 7280 = 13" Reel T= Tantalum 004 = 4V 006 = 6.3V 010 = 10V 016 = 16V A = N/A Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range -55C to 125C .15F-477F @ 120 Hz/25C K Tolerance (10%), M Tolerance (20%) 4V-50V DF(120Hz) Refer to Part Number Electrical Specification Table ESR (100kHz) Refer to Part Number Electrical Specification Table Leakage Current 0.01CV (A) at Rated Voltage after 5 minutes (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 9/6/2011 2 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Qualification Test Condition Characteristics C/C Endurance Storage Life Thermal Shock Temperature Stability 85C @ Rated Voltage, 2000 Hours 125C @ 2/3 Rated Voltage, 2000 Hours 125C @ 0 Volts, 2000 Hours MIL-Std-202, Method 107, Condition B, mounted, -55C to 125 C, 1000 cycles Extreme temperature exposure at a succession of continuous steps at +25C, -55C, +25C, +85C, +125C, +25C DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Within 5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits +25C -55C +85C +125C C/C IL* 10% 10% 20% DF IL IL 1.5 x IL 1.5 x IL DCL IL n/a 10 x IL 12 x IL C/C Surge Voltage Mechanical Shock/Vibration Within 10% of initial value 25C and 85C, 1.32 x Rated Voltage 1000 cycles (125C, 1.2 x Rated Voltage) MIL-Std-202, Meth. 213, Cond. I, 100G Peak. MIL-Std-202, Meth. 204, Cond. D, 10Hz to 2000Hz, 20G Peak Within 5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial Limit Certification DSCC Drawing 04053 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 9/6/2011 3 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Electrical Characteristics Capacitance vs. Frequency ESR vs. Frequency 1000 1,000 T496B106M016ATE3K5 T496B106M016ATE3K5_IMP T496D476M016ATE400_IMP Capacitance (F) Impedance, ESR (Ohms) 100 T496X107M016ATE700_IMP T496B106M016ATE3K5_ESR T496D476M016ATE400_ESR T496X107M016ATE700_ESR 10 1 0.1 T496D476M016ATE400 100 T496X107M016ATE700 10 1 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 0 10,000,000 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 Dimensions - Millimeters (Inches) Metric will govern Termination cutout at KEMET's option, either end Case Size KEMET EIA B 3528-21 C 6032-28 D 7343-31 X 7343-43 Component L* W* H* 3.5 02 (138 .008) 6.0 0.3 (.236 .03) 7.3 0.3 (287 .012) 7.3 0.3 (.287 .012) 2.8 0.2 (.110 .008) 3.2 0.3 (.126 .012) 4.3 0.3 (.169 .012) 4.3 0.3 (.169 .012) 1.9 0.2 (.075 .008) 2.5 0.3 (.098 .012) 2.8 0.3 (.110 .012) 4.0 0.3 (.157 .012) F* 0.1 S* 0.3 B* 0.15 (.004) (.012) (Ref) .006 2.2 (.087) 0.8 (.031) 0.4 (.016) 2.2 (.087) 1.3 (.051) 0.5 (.020) 2.4 (.094) 1.3 (.051) 0.5 (.020) 2.4 (.094) 1.3 (.051) 0.5 (.020) X (Ref) 0.10 0.10 (.004 .004) 0.10 0.10 (.004 .004) 0.10 0.10 (.004 .004) 0.10 0.10 (.004 .004) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) 0.5 (.020) 1.0 (.039) 0.13 (.005) 2.1 (.083) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.1 ( (.122) 2.8 (.110) 2.4 (.094) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 1.8 (.071) 2.2 (.087) Notes: (Ref) - Dimensions provided for reference only. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch. * MIL-C-55365/8 specified dimensions (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 9/6/2011 4 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Table 1 - Ratings & Part Number Reference Rated Voltage Rated Cap 85C VDC 4 4 4 4 4 4 4 4 4 4 4 120Hz F 68 68 100 150 150 220 220 330 330 330 470 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 Case Code/ Case Size KEMET Part Number DC Leakage C/6032-28 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 (See below for part options) T496C686(1)004A(2)E1K6 T496C686(1)004A(2)E400 T496C107(1)004A(2)E1K2 T496D157(1)004A(2)E800 T496C157(1)004A(2)E1K2 T496D227(1)004A(2)E700 T496D227(1)004A(2)E400 T496D337(1)004A(2)E700 T496D337(1)004A(2)E400 T496X337(1)004A(2)E700 T496X477(1)004A(2)E500 Amps +20C max/5min 2.7 2.7 4.0 6.0 6.0 8.8 8.8 13.2 13.2 13.2 18.8 4.7 6.8 10 15 22 22 22 33 33 47 47 47 68 68 100 100 100 100 100 150 150 150 220 220 220 220 330 330 B/3528-21 B/3528-21 B/3528-21 C/6032-28 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 C/6032-28 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 T496B475(1)006A(2)E3K5 T496B685(1)006A(2)E3K5 T496B106(1)006A(2)E3K5 T496C156(1)006A(2)E2K0 T496B226(1)006A(2)E3K5 T496B226(1)006A(2)E1K5 T496C226(1)006A(2)E2K0 T496C336(1)006A(2)E2K0 T496C336(1)006A(2)E600 T496C476(1)006A(2)E1K6 T496C476(1)006A(2)E600 T496D476(1)006A(2)E1K0 T496C686(1)006A(2)E1K2 T496D686(1)006A(2)E1K0 T496X107(1)006A(2)E900 T496X107(1)006A(2)E300 T496D107(1)006A(2)E800 T496D107(1)006A(2)E400 T496C107(1)006A(2)E400 T496X157(1)006A(2)E300 T496D157(1)006A(2)E700 T496D157(1)006A(2)E300 T496X227(1)006A(2)E700 T496X227(1)006A(2)E300 T496D227(1)006A(2)E700 T496D227(1)006A(2)E300 T496X337(1)006A(2)E500 T496X337(1)006A(2)E300 0.3 0.4 0.6 0.9 1.4 1.4 1.4 2.1 2.1 3.0 3.0 3.0 4.3 4.3 6.3 6.3 6.3 6.3 6.3 9.5 9.5 9.5 13.9 13.9 13.9 13.9 20.8 20.8 10 10 10 10 10 10 10 10 10 10 VDC 85C 3.3 4.7 6.8 10 15 15 15 22 22 33 F 120Hz B/3528-21 B/3528-21 B/3528-21 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 T496B335(1)010A(2)E3K5 T496B475(1)010A(2)E3K5 T496B685(1)010A(2)E3K5 T496C106(1)010A(2)E2K0 T496B156(1)010A(2)E3K5 T496C156(1)010A(2)E2K0 T496C156(1)010A(2)E600 T496C226(1)010A(2)E2K0 T496C226(1)010A(2)E500 T496D336(1)010A(2)E1K0 (See below for part options) 0.3 0.5 0.7 1.0 1.5 1.5 1.5 2.2 2.2 3.3 max/5min Amps +20C Rated Voltage Rated Cap KEMET Part Number DC Leakage KEMET/EIA KEMET/EIA Case Code/ Case Size DF ESR Maximum Allowable Ripple Current +20C 120Hz +20C 100kHz +25C 100kHz +85C 100kHz +125C 100kHz % Max mOhms mAmps mAmps mAmps 6.0 1600 262 236 105 6.0 400 524 472 210 8.0 1200 303 273 121 8.0 800 433 390 173 8.0 1200 303 273 121 8.0 700 463 417 185 8.0 400 612 551 245 8.0 700 463 417 185 8.0 400 612 551 245 8.0 700 486 437 194 8.0 500 574 517 230 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 3500 3500 3500 2000 3500 1500 2000 2000 600 1600 600 1000 1200 1000 900 300 800 400 400 300 700 300 700 300 700 300 500 300 156 156 156 235 156 238 235 235 428 262 428 387 303 387 428 742 433 612 524 742 463 707 486 742 463 707 574 742 140 140 140 212 140 214 212 212 385 236 385 348 273 348 385 668 390 551 472 668 417 636 437 668 417 636 517 668 62 62 62 94 62 95 94 94 171 105 171 155 121 155 171 297 173 245 210 297 185 283 194 297 185 283 230 297 6.0 3500 156 140 62 6.0 3500 156 140 62 6.0 3500 156 140 62 6.0 2000 235 212 94 6.0 3500 156 140 62 6.0 2000 235 212 94 6.0 600 428 385 171 6.0 2000 235 212 94 6.0 500 469 422 188 155 6.0 1000 387 348 % Max mOhms mAmps mAmps mAmps +20C 120Hz +20C 100kHz +25C 100kHz +85C 100kHz +125C 100kHz DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Temp260C J-STD-020D 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 J-STD-020A Temp260C Moisture Sensitivity 1) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2010_T496 * 9/6/2011 5 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Table 1 - Ratings & Part Number Reference con't Rated Voltage Rated Cap 85C VDC 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 120Hz F 33 33 33 47 47 47 47 68 68 68 100 100 100 150 150 150 150 220 220 220 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 Case Code/ Case Size KEMET Part Number DC Leakage D/7343-31 C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 C/6032-28 X/7343-43 D/7343-31 D/7343-31 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 (See below for part options) T496D336(1)010A(2)E400 T496C336(1)010A(2)E1K6 T496C336(1)010A(2)E400 T496D476(1)010A(2)E1K0 T496D476(1)010A(2)E400 T496C476(1)010A(2)E1K2 T496C476(1)010A(2)E400 T496X686(1)010A(2)E900 T496D686(1)010A(2)E800 T496D686(1)010A(2)E400 T496X107(1)010A(2)E400 T496D107(1)010A(2)E700 T496D107(1)010A(2)E400 T496X157(1)010A(2)E700 T496X157(1)010A(2)E400 T496D157(1)010A(2)E700 T496D157(1)010A(2)E400 T496X227(1)010A(2)E500 T496X227(1)010A(2)E300 T496D227(1)010A(2)E300 Amps +20C max/5min 3.3 3.3 3.3 4.7 4.7 4.7 4.7 6.8 6.8 6.8 10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.0 22.0 22.0 2.2 3.3 3.3 4.7 4.7 6.8 6.8 10 10 10 15 15 22 22 22 22 33 33 47 47 47 47 68 100 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 X/7343-43 T496B225(1)016A(2)E3K5 T496B335(1)016A(2)E3K5 T496B335(1)016A(2)E2K1 T496B475(1)016A(2)E3K5 T496B475(1)016A(2)E1K6 T496C685(1)016A(2)E2K0 T496C685(1)016A(2)E600 T496B106(1)016A(2)E3K5 T496C106(1)016A(2)E2K0 T496C106(1)016A(2)E700 T496C156(1)016A(2)E2K0 T496C156(1)016A(2)E600 T496D226(1)016A(2)E1K0 T496D226(1)016A(2 E500 T496C226(1)016A(2)E1K6 T496C226(1)016A(2)E1K0 T496D336(1)016A(2)E1K0 T496D336(1)016A(2)E400 T496X476(1)016A(2)E900 T496X476(1)016A(2)E400 T496D476(1)016A(2)E800 T496D476(1)016A(2)E400 T496D686(1)016A(2)E400 T496X107(1)016A(2)E700 0.4 0.5 0.5 0.8 0.8 1.1 1.1 1.6 1.6 1.6 2.4 2.4 3.5 3.5 3.5 3.5 5.3 5.3 7.5 7.5 7.5 7.5 10.9 16.0 20 20 20 20 20 VDC 85C 1.5 2.2 2.2 3.3 4.7 F 120Hz B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 T496B155(1)020A(2)E5K0 T496B225(1)020A(2)E3K5 T496B225(1)020A(2)E1K6 T496B335(1)020A(2)E3K5 T496C475(1)020A(2)E2K0 (See below for part options) 0.3 0.4 0.4 0.7 0.9 max/5min Amps +20C Rated Voltage Rated Cap KEMET Part Number DC Leakage KEMET/EIA KEMET/EIA Case Code/ Case Size DF ESR Maximum Allowable Ripple Current +20C 120Hz +20C 100kHz +25C 100kHz +85C 100kHz +125C 100kHz % Max mOhms mAmps mAmps mAmps 6.0 400 612 551 245 6.0 1600 262 236 105 6.0 400 524 472 210 6.0 1000 387 348 155 6.0 400 612 551 245 6.0 1200 303 273 121 6.0 400 524 472 210 6.0 900 428 385 171 6.0 800 433 390 173 6.0 400 612 551 245 8.0 400 642 578 257 8.0 700 463 417 185 8.0 400 612 551 245 8.0 700 486 437 194 8.0 400 642 578 257 8.0 700 463 417 185 8.0 400 612 551 245 8.0 500 574 517 230 8.0 300 742 668 297 8.0 300 707 636 283 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 3500 3500 2100 3500 1600 2000 600 3500 2000 700 2000 600 1000 500 1600 1000 1000 400 900 400 800 400 400 700 156 156 201 156 230 235 428 156 235 396 235 428 387 548 262 332 387 612 428 642 433 612 612 486 140 140 181 140 207 212 385 140 212 356 212 385 348 493 236 299 348 551 385 578 390 551 551 437 62 62 80 62 92 94 171 62 94 158 94 171 155 219 105 133 155 245 171 257 173 245 245 194 6.0 5000 130 117 52 6.0 3500 156 140 62 6.0 1600 230 207 92 6.0 3500 156 140 62 94 6.0 2000 235 212 % Max mOhms mAmps mAmps mAmps +20C 120Hz +20C 100kHz +25C 100kHz +85C 100kHz +125C 100kHz DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Temp260C J-STD-020D 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 J-STD-020A Temp260C Moisture Sensitivity 1) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2010_T496 * 9/6/2011 6 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Table 1 - Ratings & Part Number Reference con't Rated Voltage Rated Cap 85C VDC 20 20 20 20 20 20 20 20 20 20 20 20 20 20 120Hz F 6.8 6.8 10 10 15 15 15 22 22 33 33 33 47 47 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 Case Code/ Case Size KEMET Part Number DC Leakage C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 X/7343-43 D/7343-31 (See below for part options) T496C685(1)020A(2)E2K0 T496C685(1)020A(2)E600 T496C106(1)020A(2)E2K0 T496C106(1)020A(2)E800 T496D156(1)020A(2)E1K0 T496D156(1)020A(2)E500 T496C156(1)020A(2)E500 T496D226(1)020A(2)E1K0 T496D226(1)020A(2)E500 T496X336(1)020A(2)E900 T496X336(1)020A(2)E400 T496D336(1)020A(2)E400 T496X476(1)020A(2)E300 T496D476(1)020A(2)E300 Amps +20C max/5min 1.4 1.4 2.0 2.0 3.0 3.0 3.0 4.4 4.4 6.6 6.6 6.6 9.4 9.4 0.68 1 1 1.5 1.5 2.2 3.3 3.3 4.7 4.7 4.7 6.8 6.8 10 10 10 15 15 15 22 22 22 22 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 T496B684(1)025A(2)E6K5 T496B105(1)025A(2)E5K0 T496B105(1)025A(2)E3K5 T496B155(1)025A(2)E5K0 T496B155(1)025A(2)E1K6 T496C225(1)025A(2)E3K5 T496C335(1)025A(2)E2K5 T496C335(1)025A(2)E2K1 T496B475(1)025A(2)E4K0 T496C475(1)025A(2)E2K5 T496C475(1)025A(2)E1K3 T496C685(1)025A(2)E2K0 T496C685(1)025A(2)E600 T496C106(1)025A(2)E600 T496D106(1)025A(2)E1K2 T496D106(1)025A(2)E600 T496C156(1)025A(2)E750 T496D156(1)025A(2)E1K0 T496D156(1)025A(2)E500 T496X226(1)025A(2)E900 T496X226(1)025A(2)E400 T496D226(1)025A(2)E800 T496D226(1)025A(2)E400 0.2 0.3 0.3 0.4 0.4 0.6 0.8 0.8 1.2 1.2 1.2 1.7 1.7 2.5 2.5 2.5 3.8 3.8 3.8 5.5 5.5 5.5 5.5 35 35 35 35 35 35 35 35 35 35 35 35 VDC 85C 0.47 0.47 0.68 1 1 1.5 1.5 2.2 2.2 3.3 3.3 4.7 F 120Hz B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 T496B474(1)035A(2)E8K0 T496B474(1)035A(2)E2K6 T496B684(1)035A(2)E6K5 T496B105(1)035A(2)E5K0 T496B105(1)035A(2)E3K1 T496C155(1)035A(2)E4K5 T496C155(1)035A(2)E2K6 T496C225(1)035A(2)E3K5 T496C225(1)035A(2)E1K6 T496C335(1)035A(2)E2K5 T496C335(1)035A(2)E900 T496D475(1)035A(2)E1K5 (See below for part options) 0.2 0.2 0.2 0.4 0.4 0.5 0.5 0.8 0.8 1.2 1.2 1.6 max/5min Amps +20C Rated Voltage Rated Cap KEMET Part Number DC Leakage KEMET/EIA KEMET/EIA Case Code/ Case Size DF ESR Maximum Allowable Ripple Current +20C 120Hz +20C 100kHz +25C 100kHz +85C 100kHz +125C 100kHz % Max mOhms mAmps mAmps mAmps 6.0 2000 235 212 94 6.0 600 428 385 171 6.0 2000 235 212 94 6.0 800 371 334 148 6.0 1000 387 348 155 6.0 500 548 493 219 6.0 500 469 422 188 6.0 1000 387 348 155 6.0 500 548 493 219 6.0 900 428 385 171 6.0 400 642 578 257 6.0 400 612 551 245 6.0 300 742 668 297 6.0 300 707 636 283 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6500 5000 3500 5000 1600 3500 2500 2100 4000 2500 1300 2000 600 600 1200 600 750 1000 500 900 400 800 400 114 130 156 130 230 177 210 229 146 210 291 235 428 428 354 500 383 387 548 428 642 433 612 103 117 140 117 207 159 189 206 131 189 262 212 385 385 319 450 345 348 493 385 578 390 551 46 52 62 52 92 71 84 92 58 84 116 94 171 171 142 200 153 155 219 171 257 173 245 4.0 8000 103 93 41 4.0 2600 181 163 72 4.0 6500 114 103 46 4.0 5000 130 117 52 4.0 3100 166 149 66 6.0 4500 156 140 62 6.0 2600 206 185 82 6.0 3500 177 159 71 6.0 1600 262 236 105 6.0 2500 210 189 84 6.0 900 350 315 140 126 6.0 1500 316 284 % Max mOhms mAmps mAmps mAmps +20C 120Hz +20C 100kHz +25C 100kHz +85C 100kHz +125C 100kHz DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Temp260C J-STD-020D 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 J-STD-020A Temp260C Moisture Sensitivity 1) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2010_T496 * 9/6/2011 7 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Table 1 - Ratings & Part Number Reference con't Rated Voltage Rated Cap 85C VDC 35 35 35 35 35 35 35 35 35 35 120Hz F 4.7 6.8 6.8 10 10 10 15 15 15 22 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 VDC 85C 0.15 0.22 0.22 0.33 0.33 0.47 0.47 0.68 0.68 1 1 1.5 1.5 2.2 2.2 3.3 3.3 4.7 4.7 4.7 F 120Hz Rated Voltage Rated Cap Case Code/ Case Size KEMET/EIA D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 X/7343-43 X/7343-43 D/7343-31 X/7343-43 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 KEMET/EIA Case Code/ Case Size KEMET Part Number DC Leakage (See below for part options) T496D475(1)035A(2)E700 T496D685(1)035A(2)E1K3 T496D685(1)035A(2)E750 T496X106(1)035A(2)E1K0 T496X106(1)035A(2)E500 T496D106(1)035A(2)E400 T496X156(1)035A(2)E900 T496X156(1)035A(2)E500 T496D156(1)035A(2)E500 T496X226(1)035A(2)E300 Amps +20C max/5min 1.6 2.4 2.4 3.5 3.5 3.5 5.3 5.3 5.3 7.7 +20C 120Hz +20C 100kHz +25C 100kHz +85C 100kHz +125C 100kHz % Max mOhms mAmps mAmps mAmps 6.0 700 463 417 185 6.0 1300 340 306 136 6.0 750 447 402 179 6.0 1000 406 365 162 6.0 500 574 517 230 6.0 400 612 551 245 6.0 900 428 385 171 6.0 500 574 517 230 6.0 500 548 493 219 6.0 300 742 668 297 Temp260C J-STD-020D 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 T496B154(1)050A(2)E16K T496B224(1)050A(2)E14K T496B224(1)050A(2)E10K T496B334(1)050A(2)E10K T496B334(1)050A(2)E2K6 T496C474(1)050A(2)E8K0 T496C474(1)050A(2)E1K9 T496C684(1)050A(2)E7K0 T496C684(1)050A(2)E1K7 T496C105(1)050A(2)E5K5 T496C105(1)050A(2)E2K7 T496C155(1)050A(2)E5K0 T496C155(1)050A(2)E2K0 T496D225(1)050A(2)E2K5 T496D225(1)050A(2)E900 T496D335(1)050A(2)E2K0 T496D335(1)050A(2)E1K0 T496X475(1)050A(2)E1K5 T496X475(1)050A(2)E400 T496D475(1)050A(2)E400 (See below for part options) 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.3 0.3 0.5 0.5 0.8 0.8 1.1 1.1 1.7 1.7 2.4 2.4 2.4 max/5min Amps +20C 4.0 16000 73 66 29 4.0 14000 78 70 31 4.0 10000 92 83 37 4.0 10000 92 83 37 4.0 2600 181 163 72 4.0 8000 117 105 47 4.0 1900 241 217 96 4.0 7000 125 113 50 4.0 1700 254 229 102 4.0 5500 141 127 56 4.0 2700 202 182 81 6.0 5000 148 133 59 6.0 2000 235 212 94 6.0 2500 245 221 98 6.0 900 408 367 163 6.0 2000 274 247 110 6.0 1000 387 348 155 6.0 1500 332 299 133 6.0 400 642 578 257 6.0 400 612 551 245 % Max mOhms mAmps mAmps mAmps +20C 120Hz +20C 100kHz +25C 100kHz +85C 100kHz +125C 100kHz 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 J-STD-020A Temp260C KEMET Part Number DC Leakage DF DF ESR ESR Maximum Allowable Ripple Current Maximum Allowable Ripple Current Moisture Sensitivity Moisture Sensitivity 1) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2010_T496 * 9/6/2011 8 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Recommended Voltage Derating Guidelines 120% % Working Voltage 100% 80% % Change in Working DC Voltage with Temperature 60% 40% Recommended Maximum Application Voltage (As % of Rated Voltage) 20% 0% 67% -55 25 33% 85 Temperature (C) 125 Ripple Current/Ripple Voltage Case Code KEMET A B C D X EIA 3216-18 3528-21 6032-28 7343-31 7343-43 E R S T U V T510X T510E 7260-38 2012-12 3216-12 3528-12 6032-15 7343-20 7343-43 7260-38 Maximum Power Dissipation (Pmax) mWatts @ 25C w/+20C Rise 75 85 110 150 165 200 25 60 70 90 125 270 285 Temperature Compensation Multipliers for Maximum Power Dissipation 25C 85C 1.00 0.90 T= Environmental Temperature 125C 0.40 Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = P max/R E(max) = P max*R I = rms ripple current (amperes) E = rms ripple voltage (volts) Pmax = maximum power dissipation(watts) R = ESR at specified frequency (ohms) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 9/6/2011 9 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25C 85C 125C 15% of Rated Voltage 5% of Rated Voltage 1% of Rated Voltage Table 2 - Land Dimensions/Courtyard KEMET Metric Size Code Case EIA Density Level A: Maximum (Most) Land Protrusion (mm) X Y C Density Level B: Median (Nominal) Land Protrusion (mm) V1 V2 X Y C V1 Density Level C: Minimum (Least) Land Protrusion (mm) V2 X Y C V1 V2 B 3528-21 2.35 2.15 1.45 6.10 4.00 2.25 1.75 1.35 5.00 3.50 2.15 1.35 1.25 4.10 3.20 C 6032-28 2.35 2.65 2.60 8.90 4.40 2.25 2.25 2.50 7.80 3.90 2.15 1.85 2.40 6.90 3.60 D 7343-31 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 X 7343-43 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). Height of these chips may create problems in wave soldering. Land pattern geometry is too small for silkscreen outline . (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 9/6/2011 10 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Soldering Process Note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurred, the iron should be removed immediately. "Wiping" the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the goldcolored epoxy may be observed. This slight darkening is normal and is not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Min (TSmin) 100C 150C Temperature Max (TSmax) 150C 200C Time (ts) from Tsmin to Tsmax) 60-120 sec 60-120 sec Ramp-up Rate (TL to TP) 3C/sec max 3C/sec max Liquidous Temperature (TL) 183C 217C Time Above Liquidous (tL) 60-150 sec 220C* 235C** 60-150 sec 250C* 260C** Peak Temperature (TP) Time within 5C of Max Peak Temperature (tP) 20 sec max 30 sec max Ramp-down Rate (TP to TL) 6C/sec max 6C/sec max Time 25C to Peak Temperature 6 minutes max 8 minutes max Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W and Z TP Temperature KEMET's families of surface mount capacitors are compatible with wave (single or dual), convection, IR or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. TL tP Max Ramp Up Rate = 3 C/sec Max Ramp Down Rate = 6 C/sec tL Tsmax Tsmin 25 tS 25 C to Peak Time Construction (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 9/6/2011 11 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Capacitor Marking KEMET Fused MnO2 Rated Voltage F+ 227 10 K 030 Polarity Indicator (+) Picofarad Code KEMET ID PWC* * 030 = 30th week of 2010 Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature - reels may soften or warp, and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40C, and maximum storage humidity not exceed 60% relative humidity. In addition, temperature fluctuations should be minimized to avoid condensation on the parts, and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably within three years of receipt. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 9/6/2011 12 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Tape & Reel Packaging Information KEMET's Molded Tantalum and Aluminum Chip Capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with EIA Standard 481-D: Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick and place systems. Table 3 - Packaging Quantity Case Code KEMET R I S T M U L W Z V A B C D Y X E EIA 2012-12 3216-10 3216-12 3528-12 3528-15 6032-15 6032-19 7343-15 7343-17 7343-20 3216-18 3528-21 6032-28 7343-31 7343-40 7343-43 7260-38 Tape Width-mm 7" Reel* 13" Reel* 8 8 8 8 8 12 12 12 12 12 8 8 12 12 12 12 12 2,500 3,000 2,500 2,500 2,000 1,000 1,000 1,000 1,000 1,000 2,000 2,000 500 500 500 500 500 10,000 12,000 10,000 10,000 8,000 5,000 5,000 3,000 3,000 3,000 9,000 8,000 3,000 2,500 2,000 2,000 2,000 * No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 9/6/2011 13 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Figure 1 - Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ODo Po [10 pitches cumulative tolerance on tape 0.2 mm] E1 Ao F Ko W B1 E2 Bo S1 P1 T1 Center Lines of Cavity OD 1 Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. Embossment For cavity size, see Note 1 Table 5 User Direction of Unreeling Table 4 - Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 8mm 12mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 16mm D1 Min. Note 1 1.0 (0.039) 1.5 (0.059) E1 P0 P2 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) R Ref. Note 2 25.0 (0.984) 30 (1.181) S1 Min. Note 3 T Max. T1 Max. 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch 8mm Single (4mm) 12mm Single (4mm) & Double (8mm) 16mm Triple (12mm) B1 Max. Note 4 4.35 (0.171) E2 Min. F P1 T2 Max W Max 6.25 (0.246) 3.5 0.05 (0.138 0.002) 4.0 0.10 (0.157 0.004) 2.5 (0.098) 8.3 (0.327) 8.2 (0.323) 10.25 (0.404) 5.5 0.05 (0.217 0.002) 8.0 0.10 (0.315 0.004) 4.6 (0.181) 12.3 (0.484) 12.1 (0.476) 14.25 (0.561) 5.5 0.05 (0.217 0.002) 8.0 0.10 (0.315 0.004) 4.6 (0.181) 16.3 (0.642) A0,B0 & K0 Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape with or without components shall pass around R without damage (see Figure 5). 3. If S1<1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Document 481 paragraph 4.3 (b)). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12mm tapes and 10 maximum for 16mm tapes (see Figure 3). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8mm and 12mm wide tape and to 1.0mm maximum for 16mm tape (see Figure 4). (e) see Addendum in EIA Document 481 for standards relating to more precise taping requirements. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 9/6/2011 14 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8mm 12mm & 16mm 0.1 Newton to 1.0 Newton (10gf to 100gf) 0.1 Newton to 1.3 Newton (10gf to 130gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 30010 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556 and EIA-624. Figure 2 - Maximum Component Rotation T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Maximum Width (mm) Rotation ( 8,12 20 16-200 10 Bo T) Typical Component Centerline Ao s Tape Width (mm) 8,12 16-56 72-200 Maximum Rotation ( 20 10 5 S) Figure 3 - Maximum Lateral Movement 8mm & 12mm Tape 16mm Tape 0.5 mm maximum 0.5 mm maximum 1.0 mm maximum 1.0 mm maximum Figure 4 - Bending Radius Embossed Carrier R Punched Carrier Bending Radius R (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 9/6/2011 15 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Figure 5 - Reel Dimensions Full Radius, See Note W3 (Includes Access Hole at Slot Location (O 40 mm min.) flange distortion at outer edge) W2 (Measured at hub) D A N (See Note) C (Arbor hole diameter) B (see Note) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm min. width x 10.0 mm min. depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 - Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size A B Min C D Min 8mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12mm 16mm Variable Dimensions -- Millimeters (Inches) Tape Size N Min 8mm 12mm 16mm 50 (1.969) W1 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com W2 Max 14.4 (0.567) 18.4 (0.724) 22.4 (0.882) W3 Shall accommodate tape width without interference T2010_T496 * 9/6/2011 16 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Figure 6 - Tape Leader & Trailer Dimensions Embossed Carrier Carrier Tape Punched Carrier 8 mm & 12 mm only Round Sprocket Holes END START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum, Components 100 mm Min. Leader 400 mm Minimum, Top Cover Tape Figure 7 - Maximum Camber Elongated sprocket holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 9/6/2011 17 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series KEMET Corporation World Headquarters Europe Asia 2835 KEMET Way Simpsonville, SC 29681 Southern Europe Geneva, Switzerland Tel: 41-22-715-0100 Northeast Asia Paris, France Tel: 33-1-4646-1009 Shenzhen, China Tel: 86-755-2518-1306 Sasso Marconi, Italy Tel: 39-051-939111 Beijing, China Tel: 86-10-5829-1711 Milan, Italy Tel: 39-02-57518176 Shanghai, China Tel: 86-21-6447-0707 Fort Lauderdale, FL Tel: 954-766-2800 Rome, Italy Tel: 39-06-23231718 Taipei, Taiwan Tel: 886-2-27528585 North America Madrid, Spain Tel: 34-91-804-4303 Southeast Asia Mailing Address: P.O. Box 5928 Greenville, SC 29606 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Corporate Offices Southeast Lake Mary, FL Tel: 407-855-8886 Northeast Wilmington, MA Tel: 978-658-1663 West Chester, PA Tel: 610-692-4642 Central Europe Hong Kong Tel: 852-2305-1168 Singapore Tel: 65-6586-1900 Landsberg, Germany Tel: 49-8191-3350800 Penang, Malaysia Tel: 60-4-6430200 Dortmund, Germany Tel: 49-2307-3619672 Bangalore, India Tel: 91-806-53-76817 Kwidzyn, Poland Tel: 48-55-279-7025 Central Schaumburg, IL Tel: 847-882-3590 Carmel, IN Tel: 317-706-6742 West Milpitas, CA Tel: 408-433-9950 Mexico Zapopan, Jalisco Tel: 52-33-3123-2141 Northern Europe Bishop's Stortford, United Kingdom Tel: 44-1279-757201 Weymouth, United Kingdom Tel: 44-1305-830747 Coatbridge, Scotland Tel: 44-1236-434455 Farjestaden, Sweden Tel: 46-485-563934 Espoo, Finland Tel: 358-9-5406-5000 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 9/6/2011 18 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Other KEMET Resources Tools Resource Location Configure A Part: CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Product Information Resource Location Products Technical Resources (Including Soldering Techniques) RoHS Statement Quality Documents http://www.kemet.com/products http://www.kemet.com/technicalpapers http://www.kemet.com/rohs http://www.kemet.com/qualitydocuments Product Request Resource Location Sample Request Engineering Kit Request http://www.kemet.com/sample http://www.kemet.com/kits Contact Resource Location Website Contact Us Investor Relations www.kemet.com http://www.kemet.com/contact http://www.kemet.com/ir Call Us 1-877-MyKEMET Twitter http://twitter.com/kemetcapacitors Disclaimer All product specifications, statements, information and data (collectively, the "Information") are subject to change without notice. All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 9/6/2011 19 Fused MnO2 Tantalum Surface Mount Capacitors - T496 Fused MnO2 Series Digitally signed by Marcy Brand DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation, ou=Marketing Communications, cn=Marcy Brand, email=marcybrand@kemet.com Date: 2011.09.14 16:31:30 -04'00' (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2010_T496 * 9/6/2011 20